Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Nice! I'm really interested in seeing them on a bike before I make my purchase. It'd be cool to get a side shot and a front shot of the bike.
Looks like I need to buy some bolts, too. Should I get longer ones or will the stock pre-2015 bolts work?
I'll include stainless bolts and two OEM gaskets (stock gaskets in place can easily be re-used) for those ordering before I have them ready to ship in the next week or so.Looks like I need to buy some bolts, too. Should I get longer ones or will the stock pre-2015 bolts work?
That is correct.Instead of 'assuming' I'll ask (novel for me) - SMRAW NE will come the closest to looking like just another cooling fin, right?
Thanks. Order placed.That is correct.
I have ordered a set of guards and retro covers that I will be adding to my 2014 V7R. I will take some shots and post when I have them installed. I think Todd mentioned he only made a handful of these guards? If you "Google" Venier Tractor 02 you can get a really good idea how they will look and I think Todd's are even nicer as you can add the engraved Eagle if you prefer.
Two quick notes: The Vernier part is not available, and would require tapping of the head studs to mount. So if one were to source the material, cut them without it looking home-brewed, anodize, and drill/tap the head studs, I suspect the cost would surpass $99 considering your time... Unless you have plenty of free time and facilities to do it.See, I like the 2 piece that's shown on the Venier Tractor 02. It's used as one of the photos when ordering these new one's. My whole thought is that it is more cost effective to replace that one sliver of metal, like on the Venier than to replace the $100+ plate on these new parts. I'm not really a fan of paying more for a part that's protecting a $30 stock head cover.
I am going to do the same thing with mine, though i was going to use red, probably engine enamelBecause I'm getting the black powder coat I will probably paint fill the eagle engraving (like golf irons) in some contrasting color. I think red will not be visible but maybe a silver. Any thought?
Links revised, thanks for the note and order. Valve covers here; https://www.guzzitech.com/store/product/oem-v7-retro-valve-covers/Todd, if you intend for the OEM valve covers to be accessed by link in your entry above, it doesn't seem to do so for me. Both "HERE"s go to your new plate entry in your online catalog as far as I can see. Should I be able to find the OEM chrome covers somewhere there to be able add to my cart? Found the covers. Order is in for chrome covers + anodized headguards w/ eagles.