Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have the motor and trans out of the bike with the trans on the bench , oil is wet on the plunger rod at the rear of the trans with the clutch plates are soaked with oilThe trans has 2 cup shape seals on the clutch rod inside the shaft in the rear. Pull the arm on back of trans, pull out the throwout bearings & plunger w/rod. Use needle nose pliers or magnet if rod stays in to extract it.
Might have to pull swingarm if it is in the way.