Keith Holyoake
Just got it firing!
The rear suspension units may be adjusted after a small grub screw is loosened. Even if not intending to adjust I recommend removing the grub screw with a small Allen key and greasing the threads before replacing.
My screws were almost seized in place (on a fairly new bike) because no grease had been applied. If left, the screws would have become seized in place and no adjustment of the suspension would have been possible.
Suggest that when replacing the grub screw is tightened fully then backed off 1/4 of a turn.
My screws were almost seized in place (on a fairly new bike) because no grease had been applied. If left, the screws would have become seized in place and no adjustment of the suspension would have been possible.
Suggest that when replacing the grub screw is tightened fully then backed off 1/4 of a turn.
Last edited: