• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Norge 1200 faring repair

Alex Simon

Alex Simon

Just got it firing!
Joined
Aug 3, 2015
Messages
10
Location
Portugal
Hello everybody

I'm the happy owner of a Norge 1200 with 20k kms on the dash. Everything's ok except the lower fairings that have some cracks. I've searched about the material of the fairings but still had no luck. Even so, I found something called J-B Weld that claims to fix all kinds of plastic miraculously. Did anyone try this out? And which one to use, the plastic bonder or the plastic welder? I sent a message to the company trying to know the difference but still no luck.

Thank you for your help.
Alex
 
Alex, contrats on the Norge and welcome to the GT Famiglia. Hope you'll add your info to the Norge Registry; https://www.guzzitech.com/forums/threads/norge-registry-add-your-bike.11529/

I've used JB weld on the fairing tabs many times with great luck/success, as long as there's so load on the tab when in place. There might be better solutions as Mike links above, but for us in the US, JB Weld is easily obtainable via local parts stores or Amazon.com -- I have recently found JB's putty, and I'm quite happy with it, though it does set rather fast.
 
There is also a process called plastic welding. Kits to do this are available. I'm sure there must be a shop in Portugal that does this type of work. Also 3M makes products for repairing plastics. I've used 3M products to repair splits in plastic panels. They do have outlets in Europe.
 
The material is ABS. You can get a bottle of stuff to weld this at most model shops. In the UK it's called Plastic Weld.
Just put a drop on the crack with the end of a screwdriver or similar, and let it sink into the crack. Make sure it's held together for a few minutes. You may have to do this a few times on a long crack but afterwards the repair is almost invisible. Had to repair a couple of lugs on mine.
 
Brian UK said:
The material is ABS. You can get a bottle of stuff to weld this at most model shops. In the UK it's called Plastic Weld.
Just put a drop on the crack with the end of a screwdriver or similar, and let it sink into the crack. Make sure it's held together for a few minutes. You may have to do this a few times on a long crack but afterwards the repair is almost invisible. Had to repair a couple of lugs on mine.
Click to expand...

Thanks Brian. I'll try to find something in a model shop. Maybe it makes those weak spots a little stronger, it's annoying how fragile the lower fairings are.
 
One nice thing about the three bond kit is that it comes with some fiberglass cloth to reinforce the repaired area.
If you use some other version of glue I would suggest also using something to reinforce the repair.
 
You must log in or register to reply here.
Back
Top