• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Rizoma Iride Front Turn Signals on a V9

Victor Barris

Just got it firing!
Joined
Jan 18, 2018
Messages
2
Location
New Jersey
While in Austin I picked up a pair of Rizoma turn signals. Looking to replace the front stock signal lights on my 2017 V9 to give it a cleaner look. Anyone has installation details, etc?

Thanks
 
While in Austin I picked up a pair of Rizoma turn signals. Looking to replace the front stock signal lights on my 2017 V9 to give it a cleaner look. Anyone has installation details, etc?

Thanks

I bought the Rizoma front and rear signals for my 2017 Anniversario V7III. At a stand still with installation. Can’t find any helpful install instructions specific to Moto Guzzi. FR165
 
Looks like we could use a definitive write-up on wiring up LED lights.
 
I try to keep it clean - I just found that Baak sells a rear wiring harness AND now has resistors for LED conversions. I like this option much more than the bulky cheap ones you can get that get really hot.

baakmotocyclettes.com/en/home/72-rear-fender-wiring-harness-for-moto-guzzi-v7-v9.html
baakmotocyclettes.com/en/home/347-resistors-led-turn-indicators-motorcycle.html

Then this is how the resistors are wired in:
canyonchasers.net/shop/generic/resistor.php
 
Interesting that they say to put the resistor in series with the LED. This would not increse the current to keep the ECU or the flasher unit happy. It has to go in parallel.

The 50 watt rating is overkill. I calculated a 15 ohm 5 watt resistor is all you need.
 
Interesting that they say to put the resistor in series with the LED. This would not increse the current to keep the ECU or the flasher unit happy. It has to go in parallel.

The 50 watt rating is overkill. I calculated a 15 ohm 5 watt resistor is all you need.

I don’t know much about this part of it but I thought it seemed odd.
 
(Not to threadjack, just wanted to follow up and say it appears that my 2018 v7 doesn’t require resistors for LEDs. The Baak wiring harness is really helpful still.)
 
Bumping this old (mostly relevant) thread. I’ve installed 4 wire Rizoma IRIDE signals (brake / running / turn) in the back of my ‘14 V7 Special, and am getting a constantly lit rear right turn signal (with hyper flashing front) while the left side works fine. I connected the right rear signal to the left blinker and it worked correctly as well, so no issue with the wiring of the signal itself.

I’m assuming this is indicative of needing a resistor inline in the signal chain based on the symptoms?

Photo of a constantly light turn signal for reference - you can imagine the right front signal hyper flashing ;)

9960EE96 7D22 436A AD63 58E8F92ACB88
 
To (not) answer my own question, installation of a 3W Rizoma resistor inline didn't solve the problem -- the resistor itself gets SCORCHING hot after a couple of seconds of running the blinker, which seems surprising as well.
 
The resistor will get hot quickly and this is normal.
I would check with the Rizoma installation guide to see if you need two resistors for each LED light or just one.
You would need the resistor(s) on all the LED signals. If you are only installing two LED turn signals on the back and adding the resisters did not help, someone with more wiring knowledge would need to chime in.
 
Last edited:
I feel like a nimrod. Turns out one of the harness pins was crossing on the right side, I fixed the harness and everything is tied up and fine, sans resistors.
Happens to all of us. Glad you got it sorted out. I did something similar years ago with a throttle cable. I spent weeks going back over and looking at what I did. No good. Finally I removed the cable and reinstalled it and immediately saw what I had done wrong. My hands could figure out what my eyes could not.
 
Back
Top