thom429
Just got it firing!
New to me bike, has 10k miles - I noticed it was harsh over bumps/didnt seem to have rebound damping which led me change the fork oil and seals. Upon pulling the fork legs, I noticed the rebound leg was like a pogo stick. Went through the Compression leg, no issues, diassembled, cleaned, new fluid, works fine. On to the rebound leg - same process, but its still like a pogo stick - the cartridge only has any resistance in maybe the last inch or two of suspension compression. Before that, almost nothing. Fully disassembled and cleaned, pulled cartidge from fork leg, didnt see anything obvious but not quite sure what im looking for. Reassembled, filled with fluid, pumped, let sit, no difference. All but that last inch or two of travel is all spring/no damping.
Any ideas? what am i missing? Go buy matris?(still need to get it through inspection and tagged though). Did a bunch of searching and havent come up with much. Thanks in advance if someone can point me in the right direction
Any ideas? what am i missing? Go buy matris?(still need to get it through inspection and tagged though). Did a bunch of searching and havent come up with much. Thanks in advance if someone can point me in the right direction