• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Refurbishing my 2007 Norge

Thanks to everyone here for their assistance on this long journey. For the time being, unfortunately, it has to end here.

No, you've balanced your throttle bodies, but the high idle is due to the stepper motor being over zealous. Some do, some don't.

As Brian UK sez above, insert a pnuematic (air) switch in the hose between the air box and the stepper motor. I have three 1200 Sports with these installed. Once you get the motor warmed up, you can switch it off so the hose is blocked. If you want to simulate this result, simply squeeze the hose with a pair of pliers and watch the revs drop.

An added bonus is the increased engine braking you will experience and enjoy.
 
If your having to blip the throttle to get it from 2000 to 1200rpm check the linkage isn't sticking or your cables are too tight, I have found that the ball and socket joints between the throttle bodies get muck in there. On my Breva there is a switch on the clutch lever, when I pull in the clutch the revs increase by about 200rpm, your switch may be faulty and permanently on.
 
No, you've balanced your throttle bodies, but the high idle is due to the stepper motor being over zealous. Some do, some don't.

So, why wasn’t it doing that before the throttle body balancing? This is a new problem.

As Brian UK sez above, insert a pnuematic (air) switch in the hose between the air box and the stepper motor.

I will consider that after the holiday (if the GS is good so I can go at all) but not now as I am supposed to leave Wednesday night. Between now and then: mainly I will be at work.
 
If your having to blip the throttle to get it from 2000 to 1200rpm check the linkage isn't sticking or your cables are too tight, I have found that the ball and socket joints between the throttle bodies get muck in there.

Yeah, I’ve cleaned a lot of muck out of that area. Last action before closing the garage door was to liberally douse the whole area with carb cleaner to try and get any last filth out of it.

On my Breva there is a switch on the clutch lever, when I pull in the clutch the revs increase by about 200rpm, your switch may be faulty and permanently on.

Possible. But nothing answers the question “why now?” The bike hadn’t got this problem until the throttle bodies got balanced. Now it does have it. Given the time constraints I now have (and remember I’ve been working on this bike for months) I’m afraid pulling things apart to try and fix this issue - on a bike known for kicking up more issues once one is fixed - is hopelessly impractical. I’m not getting rid of the bike but for the time being the work has to stop. I’m also bitterly disappointed in it, I must admit.

It’s 06:50. I’ve been awake since 6 thinking and worrying. I didn’t sleep until after midnight trying to figure out what to do. I need reduced stress in my already difficult life, not a bike that increases it.
 
Great pix.

You obviously brought your rain gear. :giggle:

Glad it's going well. You are bound to be more comfortable than your friend on his D748! Well, unless he's only 22. :rofl:

Traded my Norge with a friend (my age) who was on a 748. Only rode a few miles. An amazing machine, but I got off feeling as if I'd been on a (very fast) fence rail! :cry:

The Norge is made for the sort of touring you are enjoying.

Best,

Bill
 
Was that Oradour sur Glane?
If so then it's a village kept exactly as it was on the day the entire population was killed by occupying forces as a reprisal. So not "fixer upper".

Anyone visiting the area around Limoges in France should visit, very thought provoking.
 
Was that Oradour sur Glane?
If so then it's a village kept exactly as it was on the day the entire population was killed by occupying forces as a reprisal. So not "fixer upper".

Anyone visiting the area around Limoges in France should visit, very thought provoking.

Well there's a buzz kill.
It's actually Le Camp des Fourches and not Oradour sur Glanes.
 
Last edited:
I’ve just spent a week riding my Norge around 2,255 miles of French countryside. I had originally intended to cross the Alps and go to Mandello but the weather turned very wet to the East so I went West instead.

My 61k miles Norge has done me proud on my week in France. It covered 2,255 miles, doing an average of 47 mpg. It’s been very comfortable and a really enjoyable ride. I’ve never had a bike with an engine that will pull through an uphill hairpin at 1,750 rpm before - torque-tastic

Several days the temperatures were over 30oC and the roads not suitable for more than 50-60mph (and the 80kph/50mph speed limit didn’t help) - the heat boiling off the cylinders was terrific, fair cooking my knees and thighs. I can see why the 8v bikes have a more complex fairing in that area.

A few issues have come up - the horns don’t work (maybe I left a connector undone when I had the fairing off?), neither do the hazard warning lights (thought I’d fixed that). More importantly I really need to restore some plushness to the front suspension with a good servicing, new oil and new HyperPro springs. The front brakes need the fluid changing and a good bleed. The rear brake needs bleeding. Might as well change the clutch fluid too. The rear shock needs a new HyperPro spring - plus I’m reasonably sure the bushes on the rear suspension linkage and wishbone are pretty well jiggered. Not a cheap fix though. All this will be done in stages over the next months as my finances don’t permit a blitz on it - plus the Slim Controller wouldn’t approve of my retiring to the garage for days on end

I’m going to change the oils again, as well as the filter. It’s less than 3k since I found all the paper bits in the inner strainer. It can’t do any harm to replace the fluids & filter, clean any sludge out of the sump and basically see what condition the oils are in.

I ❤️ my Norge
 
Back
Top