• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Refurbishing my 2007 Norge

I'd like to just thank everyone in this forum that has given me advice and encouragement as I worked on my Norge to get it ready for the French trip. It's really appreciated.
 
I rode to work yesterday - about 1 1/4 hrs each way - and on the way back the bike seemed excessively noisy. When I got home it sounded fine ticking over on my drive but when I opened the throttle I could immediately hear an exhaust leak. I think it sounds like it is coming from the left of the bike, but I’m not sure.

I shall take the fairing off today or Sunday (shan’t have a chance tomorrow) and start looking it over. I suspect that the y-piece joiner for the downpipes has a proper hole in it.

I shall need to find a cheap solution because the replacement part is not easily available and is £180 new, which is way out of budget. I hope a secondhand solution is available (or it is weld-able).


By the way, where is the CAT on the Norge? Is it in the exhaust can? Another thing that eventually might have to go, but is low priority right now because, well, funds. I’ve already spent something like £500 on a £2,600 bike with (now) 61k on the clock.
 
I wondered why my Norge sounded a bit loud the other day and this is why:

BD015AE0 C633 4336 8719 149902D5D942
https://imgur.com/t8Zhd8h

The y-piece has a chunk out of it:

2A755D88 0350 4047 9827 76A6939C506D
https://imgur.com/XkAYUB4

I cannot get the sensor out so I've left it doused in PlusGas hoping that'll ease it:

62B5DAD7 C2DD 440B 8842 C38419AAD2A2
https://imgur.com/Xi8DjE2

The header nuts are being awkward too. One of the four has undone so far. Right side won't undo at all:

A0763687 92C2 4B5B AC10 3B626B3E1005
https://imgur.com/XiIEIQT

Left hand side - lower came straight undone, upper won't budge. Again, a liberal application of PlusGas in the hope it'll ease things:

F39AC6E3 D713 4B04 817F 5517C007E4F7
https://imgur.com/CkR1X2J

I have removed the exhaust can of much heaviness and set it aside. I will put it back on if I cannot find a lighter, quiet replacement. I don't like loud cans. I can't spend $550 on a custom y-piece so I shall go looking for a 2nd-hand one. I can leave the bike for the time being and wait until something turns up - well, I shall have to! :D
 
Last edited:
Well I have picked up the downpipes, junction piece and all fixings from a 2009 Norge for £120 (~$145). The junction box is in much better condition than mine, as are the headers. Current plan is to try and get the headers off (fixings still being recalcitrant) and replace the whole lot.

Here’s hoping!
 
Hope isn't a plan, but sounds as if you have one -- or several -- of those, too. ;)

Have BTDT WRT corroded header nuts/studs, tho not as nasty as yours. Penetrating oil and, if necessary, heat should make those history.

Ditto the "frozen" lamda sensor, tho that would appear to be OBE, too.

Nice work sourcing the used ones; buon fortuna in finding lighter can. The OEM is fine with me. If I cared that much about excess weight, I'd be at the gym more and table less. :giggle:

Best,

Bill
 
A good home made penetrating oil is a 50-50 mix of acetone and automatic transmission fluid. I used that quite a bit when restoring my Model T Ford.

Penetrating oil
 
Hope isn't a plan, but sounds as if you have one -- or several -- of those, too. ;)
Nah, I’m winging it ;)

Have BTDT WRT corroded header nuts/studs, tho not as nasty as yours. Penetrating oil and, if necessary, heat should make those history.
Yeah, I’m soaking it in penetrating oil (PlusGas - it works miracles) every day for the rest of the working week then I’ll have another go at loosening them at the weekend. If that doesn’t work I’ll break out the blowtorch and a few bits & pieces to act as heat shields. There’s a few delicate things there I’d quite like to avoid being blow torched...

Ditto the "frozen" lamda sensor, tho that would appear to be OBE, too.
OBE?

Nice work sourcing the used ones; buon fortuna in finding lighter can. The OEM is fine with me. If I cared that much about excess weight, I'd be at the gym more and table less. :giggle:
I know exactly what you mean re: weight. It’s not for that, it’s to get rid of the cat. I suspect that I’m going to end up keeping the standard can though.
 
By "OBE" I meant "Overcome by Events," with the event in this case being my (mis)understanding(?) that you had gotten a new section that included the lamda sensor in that used buy .

If so or if not, best wishes on breaking the corrosion loose.

One of the hazards of tupperware -- beyond the special sensitivity of the firstgen Norge's that fail at several attachment points by simply staring at them :swear: -- is that such cladding hides corrosion and some oil leaks until too late to cure without major work.

Oh, wait; you know that. :giggle:

Bill
 
By "OBE" I meant "Overcome by Events," with the event in this case being my (mis)understanding(?) that you had gotten a new section that included the lamda sensor in that used buy .
Unfortunately it didn’t come with a new llama sensor so I’m still working on getting the old one out of the old junction piece. Gave it two soakings in PlusGas today, must get to the chemists for acetone and the local car parts place for some ATF...

One of the hazards of tupperware -- beyond the special sensitivity of the firstgen Norge's that fail at several attachment points by simply staring at them :swear: -- is that such cladding hides corrosion and some oil leaks until too late to cure without major work.
Yeah. I take the view that as I work through all the issues I find, some day I’m going to effectively have a new bike ;)

Oh, wait; you know that. :giggle:
 
Today I have had time to work on the Norge’s exhaust. 100% pure acetone is a controlled substance in the UK so the largest amount I could get on the high street was 50ml, although as that’s actually more than enough and it was very cheap, I’m not bothered. Here is the llama sensor (originally a typo but now I’ve decided to embrace it ) bathing in the solution after 6 days of PlusGas application:

https://i.imgur.com/9UCVpG9.jpg

No luck - but getting the blowtorch out did release the thing. Looks like last time it was it in, it was cross threaded. There’s a bloody surprise. Still, I’ll clean the threads up and put it into the new junction piece.

https://i.imgur.com/Qt1GmQN.jpg

I’m thinking of getting some high temperature paint, cleaning up the junction box and painting it, because the replacement one is a bit surface rusty & I don’t want to have another one snap (illustration below). Thoughts?

https://i.imgur.com/l8UBgIQ.jpg

With the application of some brute force I managed to get the left exhaust header off, although the studs came out of the cylinder head - see below - and remember these are the better ones:

https://i.imgur.com/SajbPGt.jpg
 
I tried to get the right hand exhaust header off but absolutely no luck budging either nut. They’re both badly rusted - one has almost gone right through and I might take a Dremel to it. Here is the upper one, which is pretty bad:

https://i.imgur.com/aBTwWjY.jpg

Here is the lower one, which frankly is only just still there:

https://i.imgur.com/Jg0Cqkp.jpg
 
And so I spent some time tidying up that exhaust port and getting rid of remnants of the old gasket. I’m vaguely unsure whether I should apply anything like copperslip to the new gasket’s mating surfaces when I put it back in, although there’s a way to go before I bother thinking too hard about that.
 
Back
Top