• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

GT Bar Risers

I'm up in Vancouver Canada and I rode down to get Todd to install fuel mod , pipes , air box and I couldn't agree more that she's a well trained gorilla now. Every time I ride her Im smiling the whole ride .Can you tell me more about the alternator mod ...... And moaning whale prob . Thanks
 
I'm up in Vancouver Canada and I rode down to get Todd to install fuel mod , pipes , air box and I couldn't agree more that she's a well trained gorilla now. Every time I ride her Im smiling the whole ride .Can you tell me more about the alternator mod ...... And moaning whale prob . Thanks
Hi Dave, good hearing from you, and thanks for the post! This thread is about our bar risers. Are you asking about the alternator/charging issue? That’s on a different thread, and the moaning whale mod should be done on yours. We do it with the FK install.
 
Hello!!. Did you need a cable adjustment?. It looks that the left brake cable is too tight to handle with a bar riser.
Thank you.
Hola, David. We have sold and installed quite a few of these, and nothing what ever needed as to clutch, brake or throttle cables.
 
Just got my risers a few days ago, and haven't had a chance to ride much with them yet. I needed them more than most people probably do, as I have a couple of bum elbows, and cannot completely straighten either arm.
So far, the feel is great. I will come back and add to this post after I've done some more miles.
 
Hello Todd,
Have you some bar risers still available for my 1400 touring ?
Vizir
 
Finally had the opportunity to install risers on my Eldorado. Question about tightening clamps and did not want to bother Todd on the weekend. Tighten front most bolts first and then backs with smaller gap up front, or have equal gaps front and rear? I was told long ago fronts first, but there tends to be many opinions depending on application.
Thanks
Scott
 
Finally had the opportunity to install risers on my Eldorado. Question about tightening clamps and did not want to bother Todd on the weekend. Tighten front most bolts first and then backs with smaller gap up front, or have equal gaps front and rear? I was told long ago fronts first, but there tends to be many opinions depending on application.
Thanks
Scott

Front screws first, then rear screws. This leaves the gap under the rear screws. The reasoning is that this prevents the bar from rotating down which is more likely as you typically push down on the grips more often then you would lift up.
 
Risers installed on my touring, with no difficulties . No issue with the cables and hoses .
Thanks Todd, good product .
Unfortunately, due to the Covid , it's difficult to test them on a long ride . In France, we have the curfew at 6 Pm .
 
Last edited:
folks, I installed them today on my 2017 Cal 1400 Touring. The gap between the upper plate and the bottom is much bigger than before. Should I be concerned. Let me know. I have also emailed their sales. This is the first upgrade/change I'm doing on my bike.

before and after (front and back) pics:
 

Attachments

  • handlebars_before.jpg
    handlebars_before.jpg
    79.2 KB · Views: 32
  • bars_front_side.jpg
    bars_front_side.jpg
    90.4 KB · Views: 35
  • bars_after_front.jpg
    bars_after_front.jpg
    76.3 KB · Views: 34
  • bars_after_back.jpg
    bars_after_back.jpg
    73.9 KB · Views: 31
Back
Top