• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Proper oil change check

Yarvis

Yarvis

Cruisin' Guzzisti
GT Contributor
Joined
Jul 3, 2010
Messages
105
Location
NYC
Guys
What's the proper way to check and read oil level on the new 1400's? Should oil level be between both tick marks on the stick? There is no real markings to know for sure. I check it and see oil but honestly not real clear on it. Tips? Help?

Thanks
 
And the bike should be vertical, not on the side stand when you check. Once you know where it should be, rest the bike on the side stand, then mark the stick to make life easier.
 
Thanks guys! My dipstick doesn't say max or min on it. Has some ribbing between what looks like two tick marks. I couldn't twist the dipstick off when I got home, almost felt like it was welded on. I had to wait about 20 mins or so until the engine cooled down to check. Had a couple of old wooden boards to keep her pretty much vertical. Tomorrow I'll check it again and add this last step, have my wife check the level while I sit on the bike and keep her vertical. Thanks again gents!
 
This new crap all the manufacturers are saying to check the oil drives me insane. (actually a very short putt will do that.) Start the motor. Run till warm. Let set 65-2/3 seconds. Then check oil. If I am going to check oil level you can bet it is in the morning before a ride on the cold motor. What is wrong with marking the dipstick so it is correct then? John, your marking it on the sidestand is a good one. On each of my bikes I do it like they request and set the level. I then check it cold but vertical for a reference so I can do it cold from then on. You know what? On my 1400 I get almost identical readings. I run in the middle of the marks so as to lessen blow by plus I don't worry about it going down as so far mine has not moved.
 
You must log in or register to reply here.
Back
Top