I completely pulled my front end apart (2014 V7R) for the first time and was wondering the best way to get the forks back in alignment. So quick sanity check, does the info in this link work the best:
https://www.guzzitech.com/ForkAdj-Jerry_R.html
I've also come across this (which specifies that the upper triple clamp bolts should be tightened first):
http://www.motorcyclecruiser.com/tips-tech/tech-tip-front-fork-alignment
Which one is the more "correct" procedure...upper then lower triple clamp bolts or lower then upper?
Lastly, the V7 service manual specifies 50nm of torque on the triple clamp bolts. Seems a bit high. Is this correct?
Thanks in advance!
https://www.guzzitech.com/ForkAdj-Jerry_R.html
I've also come across this (which specifies that the upper triple clamp bolts should be tightened first):
http://www.motorcyclecruiser.com/tips-tech/tech-tip-front-fork-alignment
Which one is the more "correct" procedure...upper then lower triple clamp bolts or lower then upper?
Lastly, the V7 service manual specifies 50nm of torque on the triple clamp bolts. Seems a bit high. Is this correct?
Thanks in advance!