Blunderbust
Just got it firing!
Hi all, New member here, what a great forum. I have just collected a 2009 Griso (20500 miles) and rode it up from London to my home in Norwich (140 miles). I had a great ride up and love the bike. However after it had sat for 90 minutes I started it with a view to putting it in the garage and found that it started but was very lumpy and would not tick over. After a short 30 seconds or so running it would conk out. I tried it again this morning and found that it ticked over for a couple of minutes and then it started to falter and eventually cut out again. Sorry for making my first post a " I am having a problem/question post" rather than a thank you for allowing me to join the forum one. I am waiting on the dealer getting back to me with any suggestions or setting up a pick up of the bike so the problem can be sorted.
I have checked the paperwork and see that the previous owner had made the same complaint at some time and it seems to have been fixed during a service (warranty job I think as there was no cost allocated to it). I have looked through the forum and can see that it is full of really good knowledgeable members who have already left pointers as to what it could be on previous posts, thank you all for that. I will wait and see what the dealer has to say before I start to tinker myself.
I have checked the paperwork and see that the previous owner had made the same complaint at some time and it seems to have been fixed during a service (warranty job I think as there was no cost allocated to it). I have looked through the forum and can see that it is full of really good knowledgeable members who have already left pointers as to what it could be on previous posts, thank you all for that. I will wait and see what the dealer has to say before I start to tinker myself.