theodore teo
Just got it firing!
Hi there! It's theodore from Singapore on my B11.
I've been having the Warning light and SERVICE word over-riding my computer FC mileage, Avg speed, etc. readout. When I sent it to my mechanic to do a diagnostic, they reported a P0105 error code, which apparently points to an "Air Pressure sensor" fault.
My mech said I need to get the part because he tried to check the connections, but they were not giving clear readings leading to the fault (or something to that effect). He needed me to get the sensor to make sure that it's not or it is the air pressure sensor. But when I searched to get one, there does not seem to be an air pressure sensor for the Breva. Just an air temperature sensor.
I then brought it to the MG dealer's mechanic to do his diagnostic (I didn't show him the first report I got) and he said that P0105 points to the oil pressure sensor. I startled and asked further if he was sure, because it might not be the oil pressure sensor. He said it was and they didn't have any on stock and I had to order. I told him I have 3 at home and can get them. I then probed him on the point which he then re-looked at his report and said that it could be the air pressure sensor which meant I would need to change the sensor at the throttle body and the ECU. The ECU?!! That's gonna cost me 2 grands and I'm a bit skeptical about that recommendation for now.
Does anyone have an idea what might be wrong, please? I've attached the photo of the initial report for you Guzzisti who are more knowledgeable about these than I am.
I've also searched through and stumbled across this writeup. But I'm not sure if it relates to the Breva because it's for the 1400 Cali.
https://www.manualslib.com/manual/1263596/Moto-Guzzi-B043157.html?page=129
I'm quite at a loss.
I hope someone can advise me on this.
Many thanks!
Cheers
theodore
I've been having the Warning light and SERVICE word over-riding my computer FC mileage, Avg speed, etc. readout. When I sent it to my mechanic to do a diagnostic, they reported a P0105 error code, which apparently points to an "Air Pressure sensor" fault.
My mech said I need to get the part because he tried to check the connections, but they were not giving clear readings leading to the fault (or something to that effect). He needed me to get the sensor to make sure that it's not or it is the air pressure sensor. But when I searched to get one, there does not seem to be an air pressure sensor for the Breva. Just an air temperature sensor.
I then brought it to the MG dealer's mechanic to do his diagnostic (I didn't show him the first report I got) and he said that P0105 points to the oil pressure sensor. I startled and asked further if he was sure, because it might not be the oil pressure sensor. He said it was and they didn't have any on stock and I had to order. I told him I have 3 at home and can get them. I then probed him on the point which he then re-looked at his report and said that it could be the air pressure sensor which meant I would need to change the sensor at the throttle body and the ECU. The ECU?!! That's gonna cost me 2 grands and I'm a bit skeptical about that recommendation for now.
Does anyone have an idea what might be wrong, please? I've attached the photo of the initial report for you Guzzisti who are more knowledgeable about these than I am.
I've also searched through and stumbled across this writeup. But I'm not sure if it relates to the Breva because it's for the 1400 Cali.
https://www.manualslib.com/manual/1263596/Moto-Guzzi-B043157.html?page=129
I'm quite at a loss.
I hope someone can advise me on this.
Many thanks!
Cheers
theodore