• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Putting the original mirrors back on

D

Daniel Ronan

Just got it firing!
Joined
Jul 11, 2019
Messages
4
Location
Massachusetts, USA
New here; just picked up a 2017 V7 III Stone. I've searched around the forums but everything seems to be about putting new mirrors on, not the originals.

Basically, the bike has a left bar end mirror, and no right mirror. I'm still a pretty new rider in general, so I'd really like to have both mirrors on the bike. The original owner said that when he had the bar end mirror put on, they replaced the part of the brake and clutch that has the holes for the original mirrors. Is there a specific name for this piece, and is there anywhere I can find new ones?

IMG 20190712 125739388 IMG 20190712 125746747 IMG 20190712 125721731
 
The shop manual does not directly refer to those parts except to comment on the size of bolt needed to attach them. As shown below:

Manual.jpg




Mount.jpg


Hopefully one of the other site members can assist in more detail.
 
Mayakovski said:
The shop manual does not directly refer to those parts except to comment on the size of bolt needed to attach them. As shown below:

Manual.jpg




Mount.jpg


Hopefully one of the other site members can assist in more detail.
Click to expand...

Mayakovski, thanks for the info! Any idea if the mirror post thread is M10x1.5? I'm looking at a "Brembo Bar Clamp with Mirror Perch" which I think is the generic part I need.
 
I cant really tell from the pics but those clamps wouldn't have been put
On upside down.
Just wondering because that's what I did with mine when I put bar ends on my bike.
 
My name is Jeff said:
I cant really tell from the pics but those clamps wouldn't have been put
On upside down.
Just wondering because that's what I did with mine when I put bar ends on my bike.
Click to expand...

The clamps weren't put on upside down, they were replaced with new clamps that don't have mirror perches. You can't really tell from the pictures because of how dark everything is, but the clamps have "up" with a little arrow on them.

I ended up buying some Ducati Brembo clamps from ebay ( available here on the online Store; https://gtmotocycles.com/products/brembo-no-mirror-clamp ) The mirrors fit into the mirror perches, but the bolts that are currently installed aren't long enough to go through and reach the other side of the clamps, so I have to go find some new ones. Luckily, that shouldn't be nearly as annoying.
 
Daniel, depending on where in MA you are, I'm willing to trade my factory clamps for your hole-less ones. I'm in Nashua, NH & Newmarket NH & Littleton, MA.
 
avlis said:
Daniel, depending on where in MA you are, I'm willing to trade my factory clamps for your hole-less ones. I'm in Nashua, NH & Newmarket NH & Littleton, MA.
Click to expand...

avlis, I'm in Billerica/Tewksbury MA. I'd definitely be willing to trade. Billerica is like a 20 minute drive to (some parts of) Nashua.
 
Daniel Ronan said:
avlis, I'm in Billerica/Tewksbury MA. I'd definitely be willing to trade. Billerica is like a 20 minute drive to (some parts of) Nashua.
Click to expand...
Not a problem then! We can probably meet after/before work in Tewksbury. Send me an email rsilva275 at yahoo com
 
You must log in or register to reply here.
Back
Top