Victor Barris
Just got it firing!
While in Austin I picked up a pair of Rizoma turn signals. Looking to replace the front stock signal lights on my 2017 V9 to give it a cleaner look. Anyone has installation details, etc?
Thanks
Thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
While in Austin I picked up a pair of Rizoma turn signals. Looking to replace the front stock signal lights on my 2017 V9 to give it a cleaner look. Anyone has installation details, etc?
Thanks
Interesting that they say to put the resistor in series with the LED. This would not increse the current to keep the ECU or the flasher unit happy. It has to go in parallel.
The 50 watt rating is overkill. I calculated a 15 ohm 5 watt resistor is all you need.
I bought the Rizoma front and rear signals for my 2017 Anniversario V7III. At a stand still with installation. Can’t find any helpful install instructions specific to Moto Guzzi. FR165
Happens to all of us. Glad you got it sorted out. I did something similar years ago with a throttle cable. I spent weeks going back over and looking at what I did. No good. Finally I removed the cable and reinstalled it and immediately saw what I had done wrong. My hands could figure out what my eyes could not.I feel like a nimrod. Turns out one of the harness pins was crossing on the right side, I fixed the harness and everything is tied up and fine, sans resistors.