• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Clutch fluid leak

roadventure

GT Reference
Joined
Oct 18, 2014
Messages
1,094
Location
Millville, Delaware
I changed the engine oil recently and noticed that the engine case was "wet" above and around the nut for the clutch actuator (to the left of the engine oil drain plug).

What to do to trouble shoot and repair?
 
Not a 100% sure where it is on the Guzzi but Aprilia's have the same system and they come off easily and can be bled/refilled easily as well. Just an assembly (85220R Clutch command cylinder). Either the gasket ring is leaking or one of the three bolts are not tight, if it is not the fitting on the lines from the clutch lever.
 
Thought I would follow up on my original post. When I got ready to go for a ride to visit a friend in Montgomery, AL last fall i did an engine oil change. I didn't have a new OEM type fiber crush washer for the drain plug, so I used a brass one that I had in my misc. parts box. It worked! Or so I thought. Seems that it wasn't working so well. As part of some PM I did over the winter, I drained the oil again and put the plug back in again, this time with an OEM spec fiber crush washer. Went for a 50 mile ride and no leak, no oil on the back of the engine. :party:

Moral to this story: Use the right parts.
 
Back
Top