• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Oil change interval

An old thread but no harm I say . I have bought agip oil with the recommended grade and inwith the correct SC and sf rating and all that fact I have them there since winter time . The bike has only done 6000 KMS since it's last service . I have done the valve clerance . It was easy but cleaning off the old gasket took some time . I fitted new gaskets with grease either side so hopefully they will be good next time round I will have new ones sat there in case anyway . Hears a question would Castrol car oil that's the same grade and syn be ok to use next time round . It's sold in the local car parts shop then I only need to get an oil filter posted I might try to triple up on them to save on postage costs . So what do you guys think about the oil it's Castrol edge I think .
 
Well here goes, I use Castrol synthetic in my cars and bike, correct grade of course, I don't need to use a specific motorcycle oil because my Guzzi has a dry clutch. A special oil is required for bike with wet clutches. As regards oil changes, when I bought my Breva the manual recommended using mineral oil, that was all that was around then but with synthetic oils now in the market place you can extend the time between changes. I think people change the oil way too early. There are some good studies on longevity of synthetic v Mineral. This is my personal view so don't shoot me down in flames please.
 
Kevin.NZ said:
Well here goes, I use Castrol synthetic in my cars and bike, correct grade of course, I don't need to use a specific motorcycle oil because my Guzzi has a dry clutch. A special oil is required for bike with wet clutches. As regards oil changes, when I bought my Breva the manual recommended using mineral oil, that was all that was around then but with synthetic oils now in the market place you can extend the time between changes. I think people change the oil way too early. There are some good studies on longevity of synthetic v Mineral. This is my personal view so don't shoot me down in flames please.
Click to expand...


Agree that the manufacturer sets very conservative intervals. I once worked where there was an Army Oil Analysis lab. I slipped them a sample of oil from an oil change at the recommended interval on my old CAII. Their response was why did I change it. Now that said, oil is relatively inexpensive compared to engine repairs so I still change at the recommended intervals.
 
mother goose said:
An old thread but no harm I say . I have bought agip oil with the recommended grade and inwith the correct SC and sf rating and all that fact I have them there since winter time . The bike has only done 6000 KMS since it's last service . I have done the valve clerance . It was easy but cleaning off the old gasket took some time . I fitted new gaskets with grease either side so hopefully they will be good next time round I will have new ones sat there in case anyway . Hears a question would Castrol car oil that's the same grade and syn be ok to use next time round . It's sold in the local car parts shop then I only need to get an oil filter posted I might try to triple up on them to save on postage costs . So what do you guys think about the oil it's Castrol edge I think .
Click to expand...
I’ve used Castrol Edge 10W60 in my California 1400 since new. No issues.
 
Thanks guys next time round I will go with the Castrol then . I suppose I should take it for a ride for a few miles to warm the oil before I drop it out it being an air cooled engine and all I only want to warm up the oil and have my catch pan filter tool and sump plug socket ready to go and news paper to line the garage floor as I'm a messy butter fingers type of bloke .
 
:D:D:D

Depends upon one’s perspective. 19 years ago, I sold my home in San Diego in 7 hours flat for 4x what I paid for it 6 years earlier.

Instead of paying a huge mortgage in CA, we paid cash for a house in OH and had a giant pile of money left over. In a few years, we are retiring in Italy.

That was a pretty good decision if you ask me.

I have friends that pay $2,500 rents or $4,000 monthly mortgages in San Diego.:sick: Not me. I miss San Diego weather but not that much!
 
AlanNZ said:
Many on this list prefer to do oil changes at 5,000km which is half the recommended interval. For those that do this; Do you change the filter every second change and do you also do the gearbox and drive oils at the same time?
Alan NZ
Click to expand...

Do you have an owner's manual? If so, perform oil/filter changes at the manufacturer's recommended intervals.

It is folly to believe that anyone here has more/better engineering experience with Moto Guzzi motorcycles than Moto Guzzi.
 
roadventure said:
Do you have an owner's manual? If so, perform oil/filter changes at the manufacturer's recommended intervals.

It is folly to believe that anyone here has more/better engineering experience with Moto Guzzi motorcycles than Moto Guzzi.
Click to expand...

Dave, that post is 7 years old, and in addition, Alan NZ hasn't been seen here since Sep 19, 2017.

If you click his name above his avatar picture, you can see his profile which tells you this info.
 
You must log in or register to reply here.
Back
Top