Installed this little OEM guard a week ago or so, to keep the precious CARC unit a bit safer. got it right here from @GT-Rx® , remember he can get all kinds of stuff not listed on the site too! hilariously, something went wrong with the shipping - tho the address was completely correct - and the package ended up taking a left turn and landed in Japan! watching that tracking info was pretty confusing.
I had some strange issues with the install - the bend is a bit off, so it actually contacted the swing arm initially. I spaced it out with some washers, but not an ideal solution really. I'll come up with a way to bend it out a bit eventually, while maintaining the hole positions and keeping the tabs flat. I'd expect this from maybe Hepco-Becker, but from Guzzi?
also one of the washers it came with was the wrong size! 6mm instead of 8mm.
looks great to my eyes once installed tho - 'rugged'.
I had some strange issues with the install - the bend is a bit off, so it actually contacted the swing arm initially. I spaced it out with some washers, but not an ideal solution really. I'll come up with a way to bend it out a bit eventually, while maintaining the hole positions and keeping the tabs flat. I'd expect this from maybe Hepco-Becker, but from Guzzi?
also one of the washers it came with was the wrong size! 6mm instead of 8mm.
looks great to my eyes once installed tho - 'rugged'.
Last edited: