• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

V7 Classic rear wheel not engaging at all

frocker

Just got it firing!
Joined
Sep 20, 2018
Messages
7
Location
UK
Bike: 2008 V7 Classic

Hi folks,
So I was riding along earlier today and experienced a sudden total loss of power to the rear wheel. I managed to coast to the side of the road and call a recovery truck.

The engine runs fine, but every gear behaves like it's in neutral. I can also hear a rattling coming from the rear of the block when the bike is rolled along.

Prior to this, the only issue I've been experiencing is the common shifting issues (difficulty finding neutral, clutch squeal etc.) when the engine is hot. But this was rectified by adjusting the cable.

My first thought is that the issues are probably related. Does this sound like it could be the failed clutch rod/throw out bearing? Or possibly the clutch itself is toast?

Going to start troubleshooting tomorrow, so if anyone could point me in the right direction, that would be hugely appreciated. I'm pretty inexperienced when it comes to working on Guzzis.

Cheers,
Felix
 
Not throw out bearing or push rod. The clutch would be engaged. Possible the clutch is toast, but unlikely. Could be failed rear end from lack of oil, or broken drive shaft/u-joint, or failed gearbox shaft. Too many possibilities from the description.
 
If it isn't the gear linkage, it may be output or drive shaft spines. Put it in gear and push the bike. If you can't push it, the splines are ok. If you can, they are toast.
 
Cheers for the input guys, really helpful stuff. Seems I was totally barking up the wrong tree with the clutch.
Guess my best bet is to start at the final drive and work my way forward.
Will post an update with how I get on.
 
The first check might be to drain the rear drive box oil and see if there's any debris in it .
After that , rear wheel removal to get the drive box off and then inspect the input splines
and drive shaft splines . These are probably the easiest checks before going any deeper .
Peter
 
So I was riding along earlier today and experienced a sudden total loss of power to the rear wheel. I managed to coast to the side of the road and call a recovery truck.
If momentum failed while riding, and the rear wheel still moves freely, I would suspect clutch failure based on your description. Most all other failure items would not allow it to roll, hence causing the rear wheel to lock at speed on you. How many km's do you have on your V7?
 
ycQCf6H.jpg

puXBCZN.jpg



Well, looks like I've found the offending part. Drive shaft is in really bad shape!

Seems pretty unusual for a bike with 20k miles on it. Admittedley this is the first time I've had the swingarm off to inspect, so there might be some routine maintenence job I've totally neglected to do? Guess this could also be a sign of water ingress into the bellows, I do ride through winter in England which means a lot of rain and a lot of grit.

Either way, I guess it's just a case of ordering a replacement and greasing the hell out of it before it goes in. Thanks again to everyone who offered advice!
 
That looks as if it's been stored under water.
Certainly no evidence of the drive shaft splines ever seeing grease.

Are you certain it's only done 20k miles?
 
That looks as if it's been stored under water.
Funny, I was literally typing, looks like it lived at the bottom of a river bed. I don’t think I’ve ever seen one that bad.
Thanks for posting @frocker - always good to see and have documented here.
 
If it's anything like the rear drive boxes on the Le Mans 2 , then the answer is no . In 250,000 km
on mine the only lube that ever got on the splines came from my greasing them . Peter
 
If it's anything like the rear drive boxes on the Le Mans 2 , then the answer is no . In 250,000 km
on mine the only lube that ever got on the splines came from my greasing them . Peter

So thinking of the drive box - I would imagine that the oil in that unit would be splashing everywhere- no ?
 
So thinking of the drive box - I would imagine that the oil in that unit would be splashing everywhere- no ?
The oil in the final drive box stays in the final drive box. The swingarm area where the driveshaft resides, between the final drive and the transmission, should be dry.
 
Back
Top