• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

*New* Oil pump Centauro, Daytona 4V

U

universo

Just got it firing!
Joined
Nov 25, 2008
Messages
11
Location
Austria
Hello,
I have made a new 4V oil pump with double needle bearings and steel gear (for me the only solution), have a look my Horvath Guzzi Page and go to fakten-produkte-ölpumpe.

Price for oil pump is 595. - euros.
The gear on the crank is original guzzi, the big gear is 220.- euros and the oil pump gear is only available with the pump, but for the old models like t3 and lemans you can use the same gears, because my new pump has the same shaft as the t3 pump. So, a complete set for the t3 models is 520.- euros. Gear Dampers shown bottom photo.

Regards, Peter
**AND Tappets available too, made from 42crmo4 chromoly steel, price each 60.- euros.

PH 4Voilpump
PH 4Voilpump2
PH 4Voilpump3
 
universo said:
Hello,
I have made a new 4V oil pump with double needle bearings and steel gear (for me the only solution), have a look my Horvath Guzzi Page and go to fakten-produkte-ölpumpe.







Price for oil pump is 595. - euros.
The gear on the crank is original guzzi, the big gear is 220.- euros and the oil pump gear is only available with the pump, but for the old models like t3 and lemans you can use the same gears, because my new pump has the same shaft as the t3 pump. So, a complete set for the t3 models is 520.- euros. Gear Dampers shown bottom photo.

Regards, Peter
**AND Tappets available too, made from 42crmo4 chromoly steel, price each 60.- euros.
Click to expand...
Hi there Peter,
Do you still make these items?
If so, I can't seem to get thru on your link, can you advise.
Regards
Bill
 
Just making it easier to find;-

Joe Caruso now makes his own;- woodburymotomedia.com/moto-guzzi-timing-gears-by-joe-caruso/ (£375)
As well as The German firm;- shop.daes-mototec.com/de/Motor/Oelpumpen-11/DAeS-Praezisionsoelpumpe-nadelgelagert-fuer-4-V-Motoren.html (€384)
 
You must log in or register to reply here.
Back
Top