• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Oh No - Not Tires

James,

Did you re-calibrate the speedo? (I think we can do this....)

Also, the comment about not needing to remove the brake caliper is very helpful. Anything that helps with the complicated rear wheel removal/install process is a plus.

No, I said nothing funny... ;-) To get the 200 tire off, had to remove all bolts, and spend a good 20 minutes figuring out how to bend/twist it out of the way without damaging the hydraulic line. It was not easy. Reinstallation went much easier. And, no, I haven't done the recalibration. I had forgotten we had the function available. Thanks for the reminder...
 
I think the rear brake caliper will still have to removed (or at least pushed to one side), since it is attached to the wheel axle which obviously needs to come out to remove the wheel

True, But when removing the wheel with OEM tire size the rear caliper has to be physically moved up and away (taking care to not bend or crimp the brake tube) from the installed position to make clearance for the rear tire. That also means that the left rear shock needs to be unbolted at the bottom and swung out of the way.

If the 180 wide tire can slide out without relocating the caliper this is a huge simplification to rear wheel removal.
 
True, But when removing the wheel with OEM tire size the rear caliper has to be physically moved up and away (taking care to not bend or crimp the brake tube) from the installed position to make clearance for the rear tire. That also means that the left rear shock needs to be unbolted at the bottom and swung out of the way.

If the 180 wide tire can slide out without relocating the caliper this is a huge simplification to rear wheel removal.

I've not had to remove the wheel since going to the 180, so don't know if the caliper can simply swing, or has to be completely freed. Pretty sure the shock is no longer such an issue though....
 
So…

I’ve just read 19 pages of comments on tires for the California. It seems like the “consensus” is that running a 180 rear tire is the way to go to save work on removing the wheel without sacrificing handling. I’m looking at the Avon Cobra Chrome F&R for my Cali Touring. Does that seem to sum up the current view?
 
So…

I’ve just read 19 pages of comments on tires for the California. It seems like the “consensus” is that running a 180 rear tire is the way to go to save work on removing the wheel without sacrificing handling. I’m looking at the Avon Cobra Chrome F&R for my Cali Touring. Does that seem to sum up the current view?

It noticeably speeds up handling. I've done the "Calibration" procedure outlined in the manual, but my speedometer is still approximately 8-12% off though (i.e., reads faster). The "procedure" changed nothing to my eye. FWIW....
 
So…

I’ve just read 19 pages of comments on tires for the California. It seems like the “consensus” is that running a 180 rear tire is the way to go to save work on removing the wheel without sacrificing handling. I’m looking at the Avon Cobra Chrome F&R for my Cali Touring. Does that seem to sum up the current view?

I'm on my 3rd pair of Cobra Chromes, so yeah i like them, they work well in all conditions. Not sure about making it easier to remove the rear wheel though, I have an Eldo which runs a 180 tyre standard and I still have to remove the left hand shock to move the caliper out of the way.
 
I'm on my 3rd pair of Cobra Chromes, so yeah i like them, they work well in all conditions. Not sure about making it easier to remove the rear wheel though, I have an Eldo which runs a 180 tyre standard and I still have to remove the left hand shock to move the caliper out of the way.

How many miles have you gotten on each set?
 
So…

I’ve just read 19 pages of comments on tires for the California. It seems like the “consensus” is that running a 180 rear tire is the way to go to save work on removing the wheel without sacrificing handling. I’m looking at the Avon Cobra Chrome F&R for my Cali Touring. Does that seem to sum up the current view?
I’ve found the Cobra’s far superior to the original Dunlop’s. Didn’t have to remove the shock or muffler when I removed the wheel. I cannot replace the original 200 with a 180 as the bike would not pass the road transport inspection.
 
I confirm that the cobra chrome are very very good in all conditions, even on wet roads, and very easy to run in the mountain roads .
I carry on with 200 size , no problem for me on my touring, very handy .
 
Last edited:
Geezzz, do they have a standard “Reference card” for every make and model that they use to validate that your vehicles adheres to the original spec?

Or if they think it looks off they fail you ?
 
In France, we fight the government against the technical control . My group, "FFMC" , French federation of angry riders in english, is very activ for the defense of riders . It's quite difficult, but we have a lot of success over the years .
The political class has always disliked the bikers, strangely . I think that we represent freedom, and they prefer repression and control .
 
Back
Top