• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Unlisted Breva 1100 ECU fault code 31???

JimmyZ1234

JimmyZ1234

Tuned and Synch'ed
GT Contributor
Joined
Jul 13, 2012
Messages
36
Location
Boulder Colorado
My 2007 Breva 1100 is running poorly. Plugs black, hard to start, chugs bad at low rpm but catches and runs somewhat better at high rpm. Gas milage off at least 20%. Service light comes and goes.

The ECU fault code reads 31 but this is not on the list I have seen. Is it a secret code? Do I have non-standard software in my ECU? It sure would help to know what this code means.

PS- I downloaded Guzzi Diag and bought the right connectors. Works great but I don't know hat normal ranges are for all the sensors.
 
If you go into the 'faults' screen in Guzzidiag it shold give you a description of the fault.
 
Attached is a list of the codes with some explanations/additions by me and others.
You may find this useful.
Cheers
Brian :)
 
Hi there the link the error coded above doesn't seem to work anymore.

I had a strange instance with my Breva 1100 this evening. I stopped on the way home and when I went to start the bike there was nothing. The system wouldn't boot up. I removed and checked the main 30 amp fuses and the bike would swing the needles and that was it and display an error message which I cant remember. After about 5 minutes the bike booted up. Strange!

Anyway I was after the error codes to see if I could recognise the code.
 
I have tried to upload the file as I am the originator of the Error Codes file, but, the site blocks me or disables me. Grrr!

Cheers (I think)
Brian :? :x
 
organfixsing said:
I have tried to upload the file as I am the originator of the Error Codes file, but, the site blocks me or disables me. Grrr!
Cheers (I think)
Brian :? :x
Click to expand...
Brian, sorry, send it to me direct e-mail; Todd at GuzziTech.com
The site is under lock down from most file uploads as that is the means for most hacks these days.
My link above revised, but I'll post it again here; https://www.guzzitech.com/forum/topic?f=196&t=7966
 
G'day Todd,
That address you gave takes me to the error codes so maybe the link is not down but in error.

Cheers

Brian :D
 
You must log in or register to reply here.
Back
Top