• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of Guzzi hands-on experienced help on this site, all whom give endless amounts of their time for free; BE COURTEOUS AND RESPECTFUL! Be sure to see our STORE link also above for our 700+ product inventory, including many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commerically supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. Sorry to have to do this, but we don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see our online STORE link above; GTM product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2022.

Search results

  1. Mackers

    How To Recover The 5 Digit Security Code

    When I had another key cut, the locksmith used this tag, but for what purpose I don't know.
  2. Mackers

    2007 Norge Just Died While Riding

    Check the battery leads are clean and tight.
  3. Mackers

    Buying a 2007 Breva 1100 - help

    I have an '07 Breva. I would ensure that he has two keys for the bike and check that he knows/has set a security code. Based on the age of the bike, has the alternator belt been changed and have the inner plugs been changed?
  4. Mackers

    Breva 850 (2007), lights relay.

    Dodging smegging 'roos, wombats, sambar deer...and tin tops.
  5. Mackers

    Non-startus iterruptus starting problem

    Is the charging system working? Replace the 30amp fuses, they're pretty old now and have been known to cause strange symptoms.
  6. Mackers

    Been busy with the polish

    My bike shop put me onto the IK FOAM PRO 2 SPRAYER. Foam up the wheel rims on my EV and the Chief's GT1000, wait 20 minutes and hose off. Come up beautifully!
  7. Mackers

    Breva Back wheel removal and replacement

    motoguzzimaintenance.wikifoundry.com/page/Breva+750+Rear+Wheel+Removal
  8. Mackers

    Breva 1100: 100,000 Mile Report

    You've changed the reaction rod, too. Is that for cosmetics?
  9. Mackers

    Error codes for 5AM/7SM ECUs

    Try disconnecting the battery overnight and leaving the key "ON". It may have cleared when you reconnect. Works for Guzzis...and Fords!
  10. Mackers

    At wits end with Startus Interuptus

    I feel your pain, Earl. I had the "thunking" problem too, which occurred even after fitting the MPH solution. Eventually I traced it to a poorly fitting tab on the starter solenoid. It was loose and lolled around. I could flick it with my finger and the bike would go from a starter to a...
  11. Mackers

    Side-cut keys

    Educate me Andrew. I have to use separate keys for ignition and panniers.
  12. Mackers

    1200 Sport 4V Alternator Issues

    I understand little of what you wrote, Wallice. But I had charging issues with my Breva 1100 which turned out to be a problem with one of the 30 amp fuses. Cleaned up the holder and new fuse resolved the problem.
  13. Mackers

    A different kind of startus interruptus

    Earl, I had similar problems with my "06 Breva some years back. This is what I've learned; 1) Check the tab on the starter solenoid. Mine was a poor fit and loose. Simply moving the bike on and off the side-stand was enough to cause starting issues. 2) She needs a YTX20CH-BS battery, not a...
  14. Mackers

    Moto Guzzi 100th Anniversary, 10th-12th September 2021.

    Charley, Email [email protected] and/or contact Teo. I don't have his email but he's on FB at TLM Moto Guzzi Australia.
  15. Mackers

    Moto Guzzi 100th Anniversary, 10th-12th September 2021.

    There are several container-loads of Aussies going to Nijmegen and another load going to Venice.
  16. Mackers

    Moto Guzzi 100th Anniversary, 10th-12th September 2021.

    Take the tour: https://www.tlm.nl/en/travels/extended-tours/tlm-trip-092021-cento-anni-tour/
  17. Mackers

    Norge Inspection: What to look for...

    Make sure that you get two keys or one key and the previous owner's personal pin. Otherwise there are functions in the dash that you won't be able to access.
  18. Mackers

    2013 Griso wheel hub seal

    If you're using a synthetic oil, try using an appropriate mineral oil for a while.
Top