• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

1947 AIRONE

R

RACER-G

Just got it firing!
Joined
Jun 11, 2014
Messages
3
Location
Jacksonville, Florida
Been looking for rocker arm bushing for months now.Even had someone looking for me in Italy.Still no luck.Can anyone help?This is the head that has the exposed hair pin springs.
Part numbers
M 2510 BIS
M 2510
M 2511 BIS
M 2511
These part numbers came out of a parts manual found on THIS OLD TRACTOR web sight.The manual was for 1948.
Thanks ahead for any help
 
Any good machine shop should be able to make bronze bushings. Provide a rocker and shaft and they should be able to make them.
 
Finally found them at Stucci's
I'm working at a shop in Jacksonville Fl. owned by Fabrizio Favre.
After finding a thread that pointed out that Stuuci might have them,talked with Fabrizio.Ends up they're friends.
Still been very hard to contact some of the suppliers in Italy.Most don't want to have anything to do with the internet.
Also,been repairing motorcycles for a long time.Was alot easier once upon a time to find a good machinist.
Jacksonville is a black hole for that skill,in my experience so far.
 
If you need machine work and have exact dimensions and drawings there are good machine shops here in Huntsville. One not far from me. Let me know if I can help in the future.
 
You must log in or register to reply here.
Back
Top