• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

2 into 1 Exhaust for V7r

How much do you want to spend? I can check in with Zard to see about theirs, or if I can get my hands on a V7 locally for a few weeks, I can build one to offer. For a full system, count on ~$1000 as a minimum for a custom stainless set up. I'm sure Zard would be more.
 
GT-Rx said:
How much do you want to spend? I can check in with Zard to see about theirs, or if I can get my hands on a V7 locally for a few weeks, I can build one to offer. For a full system, count on ~$1000 as a minimum for a custom stainless set up. I'm sure Zard would be more.

I think I'm alergic to expensive. I've seen the Zard in a photo, nice pipe.
 
fireflyr said:
I think I'm alergic to expensive. I've seen the Zard in a photo, nice pipe.
Prices on stainless steel tubing or equivalent, is very pricey these days. If you wanted a steel set to coat however you'd like, the cost would come down significantly; As a guess 25-33%.
 
GT-Rx said:
fireflyr said:
I think I'm alergic to expensive. I've seen the Zard in a photo, nice pipe.
Prices on stainless steel tubing or equivalent, is very pricey these days. If you wanted a steel set to coat however you'd like, the cost would come down significantly; As a guess 25-33%.


Yeah, but the stainless pipes you guys make are so pretty............. I'll start saving, you start thinking of designs. :mrgreen:
 
If I can help out I have access to 304 or 316 SS process tubing in .065 wall. I can get 20' length in 1-1/4", 1-1/2", 2" 3" and 4". All OD diameter.
 
These truly 2 into 1...
17959121_1c16e454b5302fb373be7eb2cc4c3d63_m.jpg

17959123_ecee7f96a58081e757a823b8f538c198_m.jpg

17959127_5397107660aa41aaebe7f60b25e403ce_m.jpg
 
Back
Top