Well it seems the 2 screws holding the cap on the end of the stock silencer have vibrated loose and backed completly off somewhere. Cap is loose and I have a pin wedged in for the time being. Anyone know what size the screws are? Thanks.
-
Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
-
There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
-
Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
-
Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.
8V Griso Exhaust Finisher
- Thread starter Goodvibes
- Start date
gulveal
Tuned and Synch'ed
That's funny, mines got three.
I know this because I lost one of mine. I took out one of the others to see what I needed to find to replace it. Next ride out I lost that as well!
I now have three different bolts in. One original and two different replacements I found lying around the shed. After the last time I bought some genuine Guzzi/Aprillia replacements, and then never used them, even though they cost a small fortune. I had to buy a pack of 10 because they were a 'special order' according to my local dealer.
Regards,
David
I know this because I lost one of mine. I took out one of the others to see what I needed to find to replace it. Next ride out I lost that as well!
I now have three different bolts in. One original and two different replacements I found lying around the shed. After the last time I bought some genuine Guzzi/Aprillia replacements, and then never used them, even though they cost a small fortune. I had to buy a pack of 10 because they were a 'special order' according to my local dealer.
Regards,
David
Goodvibes said:
M6 Allen head, 2CM of 1.0 mm threads. I don't think the length is particularly critical. I had to replace one of mine while I was researching your question. I used one from the junk drawer that was close enough. Blue locktite on this and the other two.
