zoom zoom
Tuned and Synch'ed
I have given the dimentions to Lee Bruns. If anyone wants some for their Norge project, contact him over on the Wildguzzi board.
You will need 2 90mm long 6 point socket head bolts to replace the cap head bolts that came with the bars. It is a 12mm bolt, I don't recall the thread. Just take one from the kit with you to the hardware store to verify. Also, it needs to be 10.9 for hardness. That equates to roughly a grade 5 bolt. (8.8 in metric is like a grade 2.)
Please Note: I have given Lee dimentions based on the 90mm long bolt. I also added thickness so that you don't need an additional flat washer in order to keep from running out of threads. (Like I had to do. See my post on the install.) If you can, I would still get the other washer I described. It was a hardened washer, very thin. It was kind of sprung up in the middle. It is some kind of a washer designed to maintain tension. I do not know what you actually call them.
Zoom Zoom,
John Henry
You will need 2 90mm long 6 point socket head bolts to replace the cap head bolts that came with the bars. It is a 12mm bolt, I don't recall the thread. Just take one from the kit with you to the hardware store to verify. Also, it needs to be 10.9 for hardness. That equates to roughly a grade 5 bolt. (8.8 in metric is like a grade 2.)
Please Note: I have given Lee dimentions based on the 90mm long bolt. I also added thickness so that you don't need an additional flat washer in order to keep from running out of threads. (Like I had to do. See my post on the install.) If you can, I would still get the other washer I described. It was a hardened washer, very thin. It was kind of sprung up in the middle. It is some kind of a washer designed to maintain tension. I do not know what you actually call them.
Zoom Zoom,
John Henry