Attached are the dimensions to my stock screen calsci type modifications which has produced great results on my NTX. It worked for me but bear in mind: I am 5'8" (1.73m). I have removed 60mm from the top of the stock screen and fitted a Wunderlich spoiler. I have removed a 5-25mm wedge from the seat to flatten/lower it. I have raised the folk legs by 10mm (25mm now protruding). I have the screen in the lowest setting.
So take all these factors into consideration if you are thinking of doing a similar modification. Also, the vertical sides of the hole (22mm dimension) taper slightly inwards at the bottom but I just guessed this.
Alan NZ
So take all these factors into consideration if you are thinking of doing a similar modification. Also, the vertical sides of the hole (22mm dimension) taper slightly inwards at the bottom but I just guessed this.
Alan NZ