Spaceclam
Cruisin' Guzzisti
Could somebody do me a favor, and get a good, high resolution shot focused on the right side of the engine, showing all the stuff stuff between the forward engine mount, the flywheel housing and the oil sump? Also, what's under that plastic shroud in the front, which covers the sump? My griso has two holes, one of which goes out toward the oil cooler, and the other is a return back into the sump (or maybe the oil intake, i dont know. I havent dropped the sump)
Im curious to see whether the holes for the oil cooler on the griso exist on that casting. There is a possibility ill be putting a 1200 sport engine onto my griso, and want to see if the oil cooler would bolt up.
Also, while i am at it, the engine should be exactly the same dimensions, right? I should be able to drop one in, no problem?
Im curious to see whether the holes for the oil cooler on the griso exist on that casting. There is a possibility ill be putting a 1200 sport engine onto my griso, and want to see if the oil cooler would bolt up.
Also, while i am at it, the engine should be exactly the same dimensions, right? I should be able to drop one in, no problem?