I have recently been getting the all too common DSB 07 and DSB 08 errors for the oil pressure sensor along with the Service message but no oil can. I have read through a few of the related threads here, and there is one thing that I have not seen described or discussed (or I have poor reading comprehension). For others who have had this, how does the warning light behave?
On my bike, the warning light and service message appear when I get about a mile from home and goes out shortly afterwards. It only comes back on after a stop of about 30 minutes or more. If I shut off the bike for just a couple of minutes, it will not come back on. It has never stayed on continuously.
Does this indicate an intermittent problem? When the light goes out, does that mean the sensor is functioning (opening the circuit, at least)? Or is it programmed to just light up long enough to alert me and then turn off until the next time the bike is started?
On my bike, the warning light and service message appear when I get about a mile from home and goes out shortly afterwards. It only comes back on after a stop of about 30 minutes or more. If I shut off the bike for just a couple of minutes, it will not come back on. It has never stayed on continuously.
Does this indicate an intermittent problem? When the light goes out, does that mean the sensor is functioning (opening the circuit, at least)? Or is it programmed to just light up long enough to alert me and then turn off until the next time the bike is started?