• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Everything you ever wanted to know about the 1200 8V engine tappet failure but were afraid to ask.

scottmastrocinque

GT Godfather!
GT di Razza Pura
Joined
Jun 26, 2011
Messages
5,679
Location
Lima, Ohio
BEFORE WE GET STARTED, IT IS VERY IMPORTANT THAT YOU UNDERSTAND THIS

Nobody can perfectly diagnose a motorcycle issue fully and competently via a description and a sound clip over the internet. Experienced individuals may be able to narrow the issue down, and even have a strong opinion about what the problem is, but there is no substitute for actually being able to touch, and listen to a motorcycle which is right in front of you.
Having clarified this point, in my opinion, based upon very limited information, this issue which I am about to explain, may be your problem.
I am not saying that your motorcycle has this problem but rather, that I believe it is a prime candidate for this issue, and that the best and final definitive diagnosis will have to come from your local Moto Guzzi certified mechanic.


So, here is the situation:

  • The valvetrain (valves and associated components) is basically the part of the motor which controls the movement of the air and fuel mixture "charge" during intake, to be allowed into the cylinder, trapping it there during the compression phase, and the power stroke, and then during the exhaust phase, allowing the burnt hot waste gases out of the cylinder to be passed into the exhaust pipes to be expelled out into the atmosphere.

8VCaminfo1

  • All of the Moto Guzzi 1200 8V engines manufactured prior to mid year production in 2012, have a potential serious issue with the valvetrain.

  • This problem is due to an engineering design flaw in the choice of materials used in the construction of the valve train on all of these affected engines.

  • This design flaw was not known until after the motorcycles were already sold and into the hands of customers. It took time for it to begin to appear on different motorcycles.

  • Not every Moto Guzzi 1200 8V engine has exhibited this problem yet. Some motorcycles have many miles on them without any issue, while others have relatively low mileage and have developed the issue. Because this is not a universal guaranteed failure, and no injuries have occurred due to it, there is no formal recall by Moto Guzzi for this particular problem. However, it is the concerted opinion of the majority of competent mechanics and many educated owners, that failure is only a matter of time; that in essence, the affected valve train is a proverbial "ticking time bomb". I happen to be one of the people who is convinced of this problem and its eventual manifestation in all affected Moto Guzzi 1200 8V engines at some point in time.

  • Since this issue was discovered by customers, dealers and mechanics and subsequently reported to Moto Guzzi, the company, without admitting any wrong-doing, changed the way the valve train is constructed.


As a matter of goodwill, Moto Guzzi has previously followed this protocol with regard to repairs to affected motorcycles.

Motorcycles which have a dealer confirmed problem, and for which the customer can demonstrate a complete service history being performed solely at authorized dealers, have received free of charge, both the parts and labor to convert the affected engines to effectively the same design as the new designed engines.​

Motorcycles which have a dealer confirmed problem, but for which the customers cannot demonstrate a complete dealer service history being performed, have been provided the conversion kit parts free of charge, and have had to either pay for a mechanic to install the parts, or if they are highly skilled, they have installed them by themselves.​
Motorcycles which have exhibited no problem, have received nothing as Moto Guzzi's official position is "if there is no problem, then there is no problem".​
Moto Guzzi believes that use of any oil in the 1200 V8 engine, other than the factory specified oil, has been the proximate cause of any and all valvetrain damage, and this is why they will only pay the entire repair bill if a dealer has performed all services and this can be verified.​
Now, so you will understand the nomenclature used here:

  • All 1200 8V engines manufactured before the implemented design change, are called "flat tappet" engines while all 1200 8V engines manufactured after the implemented design change, are called "roller" engines. This term relates to the type of valvetrain that the particular engine has in it which I will explain in a moment.

  • Furthermore, engines with the implemented design change come in two varieties, "rollerized" engines (an engine which has been updated with the kit to repair the defective design), and "factory roller" engines (indicating an engine which was produced at the Moto Guzzi factory after the implemented design change).

  • As you might expect, "factory roller" engines have no problem at all.

According to Piaggio, motorcycles produced after these specific Serial Numbers / Production Dates, have the implemented design change valve train, and are "roller" engines.

Model - Engine Designation - Last 5 Digits of Serial Number - Date of Production


Stelvio - AC - After AC12596 - 03/12/2012
Griso - A8 - After 13524 - 04/12/2012
Norge - AA - After 12214 - 04/18/2012

What exactly is the problem?

"Flat tappet" refers to the early production 1200 8V engines only. What they are talking about is what type of surface is the contact point between the camshaft lobe and the lifter (a.k.a. a "tappet").

The 1200 8V engine uses a "cam in the head" design to operate the valves. This is a generic camshaft, not the Moto Guzzi one. On it, you can see the round "bearings" which allow the camshaft to spin, and the cam "lobes", the oblong shaped parts that when the camshaft rotates on its axis, that lobe will have a low spot which rotates to a high spot, and then back down to a low spot over and over again:

8VCaminfo2


A general picture of how a camshaft presses a tappet, which moves a pushrod which presses a rocker arm which opens and closes a valve is here. As the camshaft rotates, the lobe presses against the tappet which will move in and out with the shape of the cam lobe. This motion is transmitted through the components to open and close the valves, controlling the movement of gases:

8VCaminfo3


In "flat tappet" engines, the cam lobe rides directly against the face of the tappet. This is the original Moto Guzzi design that has the problem. In "roller" tappet engines, there is a rolling bearing, which rotates around as it presses against the camshaft, thereby the two surfaces glide smoothly against each other. Here is a drawing showing the basic difference:

8VCaminfo4

OK, now that you understand what I am going to talk about here, let's get to the heart of the problem!

In the Moto Guzzi 1200 8V flat tappet engine, the camshaft lobe runs directly on the tappet face itself, which had an anodized black coating put on it called DLC "Diamond Like Carbon" Coating. This coating is an exceptional coating traditionally used on high end components like fork tube suspensions on superbikes like GSXR's etc, because is protects the fork tube sliders and makes for excellent smooth movement of the fork leg. It is also used on internal engine parts including camshafts and even tappets and it is an excellent coating for what it was designed for but as with anything, there are varying degrees of quality and Super High Quality DLC is an expensive process.

However, whomever Moto Guzzi contracted with to make their particular DLC coatings, did a poor job because, in this particular instance within the Moto Guzzi 1200 8V engine, as an internal engine part coating on the flat tappets, which are subjected to the high speed and high heat abrasian of a uncoated yet hardened cam lobe riding directly against it, it quite frankly, sucked. One surface eventually ends up destroying the other.


Here are some examples of DLC coated engine parts (not Moto Guzzi parts):

8VCaminfo5

8VCaminfo6

Moto Guzzi engineers believed that with the proper oil with specific wear resistance additives, their coating would be very durable. Unfortunately. the coatings fail, leaving a hardened cam lobe riding upon a softer steel tappet face, and behold, the tappet faces started to wear!

This is what the solid lifters look like from the top down: (Ed. - GT):

7F902F92 6DAF 4E07 841E 82968C803080

This is what the wear looks like in the Moto Guzzi 1200 8V engine. You can see the coating obliterated from the lower tappet face, and beginning to fail on the upper tappet face, and that same location on the tappet faces, is precisely where the camshaft lobes rides against the tappets:

8VCaminfo7


When this DLC coating failure happens, the valve train will continue to wear and this wear will accelerate as the face becomes more and more beat up and marred, until the point where the cam will start to slowly disintegrate from riding (but literally banging) on this rough beat up surface. It will slowly and steadily get NOISY progressing to very NOISY over time as things are whirring fast in there and surfaces that are not perfect, that collide against each other, become more damaged, and the distance between the two material faces increases, and this increased distance makes a lot of bad banging sounds.


Now...

A roller engine has the flat tappet modified with a rolling bearing face that is now the contact point with the camshafft lobe. This rolling bearing is the same hardness as the camshaft and the DLC coating was deleted. So now, there is no more problem.

Furthermore, oil is forced under pressure into this area and the two surfaces ride against each other with a super fine hydraulic coating of oil between the surfaces and the roller bearing relieves the friction between the two surfaces so there is no appreciable wear on either. Again, problem solved!


This is my personal 2012 Moto Guzzi 1200 8V Stelvio NTX engine with the valve cover removed. It is a factory roller engine. You can see the factory rollers at the top of the engine, inside those two round holes.

8VCaminfo8

8VCaminfo9


So, For engines like yours, Moto Guzzi has created different "kits" based upon which Engine Designation you have. I provide this table to you as an overview and visual, however, your dealer should check the VIN in the Piaggio database which will give the correct kit:


8VCaminfo10


This is a kit which one of the GuzziTech members purchased while he was in Italy. This is why he also has the cool logos and stickers!

If I remember correctly, he was going to "rollerize" his engine even though he had experienced no failure yet. So, he was proactively doing this conversion, and Moto Guzzi will not pay for proactive repairs:

8VCaminfo11



Still with me? Good. Almost done.

So, based upon your VIN number, and your audio tape, I believe but cannot be absolutely certain, that your engine is experiencing this DLC / flat tappet failure and that the sound you are hearing is an indication of this. If I am correct, the sound will only get louder over time.

Unfortunately, you cannot actually see the tappet faces (like in the earlier photo above) unless the camshaft box assembly is removed. You will need a mechanic for this. The good news is that if you have perfect service records, then you will be fixed for free, of this I am certain. Otherwise, you will have to pay the labor to repair it which still, isn't a bad deal from Moto Guzzi.

The 1200 8V engine is an awesome engine but it is picky and I recommend that you always use the factory recommended oil which you can get online. Just Google "Eni 4T 10W-60"

8VCaminfo12


I know this was a lot to read and digest, but I have shared with you everything you need to know to make an informed decision about this. Please get your bike to your mechanic ASAP and have it checked and hopefully repaired.

If you have another question Paul, let me know.

Best wishes!

Scott

UPDATED 10/12/2020

I am attaching 2 TSB (Technical Service Bulletins) - merged into 1 PDF file - regarding Moto Guzzi's Official Position on this issue.

PLEASE READ THEM COMPLETELY BEFORE JUST SHOOTING OFF QUESTIONS! IT ANSWERS EVERYTHING ABOUT THEIR POSITION, WHICH KIT TO USE, ETC. THANKS! - Scott
 

Attachments

  • Tappet TSBs.pdf
    9.1 MB · Views: 181
Last edited:
Hi Scott
That was fantastic info, I have just purchased a 1200 Sport 2013 with really low useage From what you are reporting it should be a roller with VIN ZGULPRO12M200024 Do you think this is the case with this Sports 1200
Best Regards
Trevor
 
Hi Scott
That was fantastic info, I have just purchased a 1200 Sport 2013 with really low useage From what you are reporting it should be a roller with VIN ZGULPRO12M200024 Do you think this is the case with this Sports 1200
Best Regards
Trevor

Hi Trevor,

Like everything else in Australia, I have no flipping idea mate! The information I have is for North America:

According to Piaggio, motorcycles produced after these specific Serial Numbers / Production Dates, have the implemented design change valve train, and are "roller" engines.

Model - Engine Designation - Last 5 Digits of Serial Number - Date of Production

Stelvio - AC - After AC12596 - 03/12/2012
Griso - A8 - After 13524 - 04/12/2012
Norge - AA - After 12214 - 04/18/2012​

I think it would be safe to assume that your bike, being a 2013, has been factory rollerized, but you can verify for sure by looking under the valve cover. I posted pictures in the original posting of what it should look like.

I sure wish they had sold that model here in 2013 because I would have bought one in a second flat!

Beautiful bike if you ask me.

Guzzi 1200Sport4v RHF 1024
 
Last edited:
Hi Trevor,

Like everything else in Australia, I have no flipping idea mate! The information I have is for North America:

According to Piaggio, motorcycles produced after these specific Serial Numbers / Production Dates, have the implemented design change valve train, and are "roller" engines.​
Model - Engine Designation - Last 5 Digits of Serial Number - Date of Production​
Stelvio - AC - After AC12596 - 03/12/2012​
Griso - A8 - After 13524 - 04/12/2012​
Norge - AA - After 12214 - 04/18/2012​

I think it would be safe to assume that your bike, being a 2013, has been factory rollerized, but you can verify for sure by looking under the valve cover. I posted pictures in the original posting of what it should look like.

I sure wish they had sold that model here in 2013 because I would have bought one in a second flat!

Beautiful bike if you ask me.

View attachment 12760

Thanks Scott for such a quick reply
I have had 1 weekend ownership and I am a complete convert from BMW, Triumph and the 50 other bikes I have owned over the last 47 years
This is basically a new bike ( had 101 kms on it) and has been laid up since 2013
I have a free 1500 km service in a week or two so I will get them to check when they set the tappets
Many Thanks Trevor

Moto Guzzi Sport 1200
 
Trevor, I am pretty sure you have an A7 Motor (have a look at the engine number to confirm)! None of these were ever rollerised, from the factory, and will require this to be carried out sooner rather than later.

That's my understanding too. I also believe that 2012 was the last year of manufacture for the 1200 Sports, which is probably why they were never included in the rollerizing updates. One quick way for Trevor to confirm this is by looking at the letter before the "M" on the VIN number.

A = 2010
B = 2011
C = 2012
D = 2013

Actually, strictly speaking, this is the year of the model, not manufacturing.
 
Thanks Tony Yes it is a A7 motor , Mario is a good guy and tells me I have to wait till it starts failing to get the parts from the factory which does go against my better judgement a bit. I wonder what the factory charges for the parts , might be an option
 
That's my understanding too. I also believe that 2012 was the last year of manufacture for the 1200 Sports, which is probably why they were never included in the rollerizing updates. One quick way for Trevor to confirm this is by looking at the letter before the "M" on the VIN number.

A = 2010
B = 2011
C = 2012
D = 2013

Actually, strictly speaking, this is the year of the model, not manufacturing.


Cheers Kiwi Dave Yes it is a D on the VIN Thanks for that info mate
 
So goin on a three week trip on friday as planned - forget about that!
After discovered all the threds around here about flat tappets faliures i´ve just had to take a look before the 8000km long trip... And there will be no trip.

The worn on left exhaust tappet was about 1,6mm!
Camshaft round like peas.. Laugh or cry, i don´t know yet but my holiday just seems to slip out of my hands..

So, the guzzi is the "new" Stelvio with just over 30000km on the trip. Early 2011 model - the first year.

How big is the chances that guzzi replaces the accident? My dealer is bankroupt since long and in sweden guzzis is as commond as tuna in toilets...

Pictures at the parts 7 5 2 10 9
 
As far as I know, a dealer has to submit the claim. Guzzi will cover the kit, but you will have to cover the labor. The pictures you have should document the claim, so you might be able to start the process long distance with a cooperative dealer. With the degree of wear, the engine should be thoroughly flushed to remove metal contamination in the oil galleys. It wouldn't hurt to inspect the rod big ends either. If you see damage there, then inspect the mains also.
 
Thanks Scott for such a quick reply
I have had 1 weekend ownership and I am a complete convert from BMW, Triumph and the 50 other bikes I have owned over the last 47 years
This is basically a new bike ( had 101 kms on it) and has been laid up since 2013
I have a free 1500 km service in a week or two so I will get them to check when they set the tappets
Many Thanks Trevor View attachment 12773
Nice looking bike!
 
My 2010 Sport 1200 4V has covered 31,000 Km and now starting to get very rattly in the cam department with pinking under full load which is a new thing for it. Yet to check the valve clearances to see if they are opening up as the cams fail ?
 
My 2010 Sport 1200 4V has covered 31,000 Km and now starting to get very rattly in the cam department with pinking under full load which is a new thing for it. Yet to check the valve clearances to see if they are opening up as the cams fail ?

After you do that, I suggest you check your followers as per the first two pictures above. I'd almost guarantee yours will come out a lot worse.
 
I suspect you are probably dead right. However the local agent in Wellington told me a few weeks ago that Guzzi will not supply the parts until the failure is complete ? I was wanting to get it fixed proactively but it is without doubt getting sick by being very rattly in the head department and now this pinking when under load such as opening the throttle going up hill starting at 4000 rpm. It used to and should pull from that RPM like a train. It is no longer happy about that. Not sure whether to take it to the dealer yet as I bought this new in Tasmania in 2010, the dealer went broke not long after the first service ( nothing to do with me, I did pay him ) and although I have done regular annual servicing and logged it all, not being a dealer ........ don't fancy my chances ? ( Even sticking to the specified 10-60 oil change every 5000 km.) Any suggestions ?
 
I suspect you are probably dead right. However the local agent in Wellington told me a few weeks ago that Guzzi will not supply the parts until the failure is complete ? I was wanting to get it fixed proactively but it is without doubt getting sick by being very rattly in the head department and now this pinking when under load such as opening the throttle going up hill starting at 4000 rpm. It used to and should pull from that RPM like a train. It is no longer happy about that. Not sure whether to take it to the dealer yet as I bought this new in Tasmania in 2010, the dealer went broke not long after the first service ( nothing to do with me, I did pay him ) and although I have done regular annual servicing and logged it all, not being a dealer ........ don't fancy my chances ? ( Even sticking to the specified 10-60 oil change every 5000 km.) Any suggestions ?

There is enough evidence of failure now. Please get the bike fixed. With it this bad the engine should have a good flush as well.
 
I spent a bunch of time last night writing this response to a new member but I though I would put it here for easy reference.

https://www.guzzitech.com/forums/threads/need-some-experienced-ears.17279/#post-130293

I hope it helps clarify the issue for those who are looking for answers. I know I found the issue so damn confusing myself.

Best Wishes,

Scott Mastrocinque

Hi Scott,

I have an 09 Stelvio with 36K miles on the clock. I have had it from 22K miles and thought it must have been rollerised, but on checking yesterday it seems not. I have contacted the dealer who sold the bike and they remember it well as they serviced it for three years, but they did not retrofit the roller cam followers. I have asked them why not and am awaiting a reply. Unfortunately they were culled in the great UK Moto Guzzi dealer cull of 2014 and no longer sell new Guzzis. If the bike had a full service history is there any responsibility on Piaggio to support the fitting of the later cam followers? I would be interested to know.
 
I suspect you are probably dead right. However the local agent in Wellington told me a few weeks ago that Guzzi will not supply the parts until the failure is complete ? I was wanting to get it fixed proactively but it is without doubt getting sick by being very rattly in the head department and now this pinking when under load such as opening the throttle going up hill starting at 4000 rpm. It used to and should pull from that RPM like a train. It is no longer happy about that. Not sure whether to take it to the dealer yet as I bought this new in Tasmania in 2010, the dealer went broke not long after the first service ( nothing to do with me, I did pay him ) and although I have done regular annual servicing and logged it all, not being a dealer ........ don't fancy my chances ? ( Even sticking to the specified 10-60 oil change every 5000 km.) Any suggestions ?

The symptoms sound terminal and if you wait longer, the costs will be huge!
 
Hi Scott,

I have an 09 Stelvio with 36K miles on the clock. I have had it from 22K miles and thought it must have been rollerised, but on checking yesterday it seems not. I have contacted the dealer who sold the bike and they remember it well as they serviced it for three years, but they did not retrofit the roller cam followers. I have asked them why not and am awaiting a reply. Unfortunately they were culled in the great UK Moto Guzzi dealer cull of 2014 and no longer sell new Guzzis. If the bike had a full service history is there any responsibility on Piaggio to support the fitting of the later cam followers? I would be interested to know.

Hi Russell,

At this point in time, being 9 years since manufacturer, all you can do is have a current Moto Guzzi dealer submit a claim to Piaggio and see if they will honor the parts. I know that they will not pay for the labor this late in the game, and some here have said that they are now even refusing to pay for the parts as so many years have gone by. All you can do is try!

The important thing here is to remain calm, polite and grateful. They really don't have to give you anything at all as the warranty is long gone.

Good Luck!
 
What is missing from the "Everything you wanted to know" is..........

Since CARC will soon not be sold anymore by Dealers;

How much are (about --- within a couple of hundred Euro's, USD's, GBP's, Deutschmarks, AUD's, CAD's -- whatever, the internet can do the conversion) the A, B or C kits and about how many hours of (Dealer) standard shop time do they take to install?

Nothing exact just "about" .

Those of us looking for used CARC's would like to know. I figure a C kit with install is more than $3,000 if you foot the whole bill.

Thanks

Mark
 
Back
Top