timax
Tuned and Synch'ed
So check engine light on but bike runs just fine.
According to Todds list here ....
P0653 - ECU has detected a high voltage condition from the coil or related.
P0611-Fuel Injector Control Module Performance -- **This lives continuously on the Guzzi MIU ECU. Check to see if you have an over-charging scenario : 15V+ at idle - replace voltage regulator immediately**
So i have checked a few times at the battery with a multimeter and also in the software..
Voltage seems just fine.
I cant reset these either they just stay there.
So any ideas??
Cheers Tim
According to Todds list here ....
P0653 - ECU has detected a high voltage condition from the coil or related.
P0611-Fuel Injector Control Module Performance -- **This lives continuously on the Guzzi MIU ECU. Check to see if you have an over-charging scenario : 15V+ at idle - replace voltage regulator immediately**
So i have checked a few times at the battery with a multimeter and also in the software..
Voltage seems just fine.
I cant reset these either they just stay there.
So any ideas??
Cheers Tim