I recently test rode a 2016 Eldorado and loved it, minus a couple issues. I’m 6’7” and the foot controls/floorboards had me pretty cramped, to the point where it was the only thing keeping me from buying. Does anyone know of a forward control kit for the Eldorado, California, or Audace? Or someone who can fabricate parts? I’ve searched a decent amount and haven’t found any. Thanks in advance.
-
Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
-
There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
-
Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
-
Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.
Forward controls- Eldorado/California/Audace
- Thread starter The Yeti
- Start date
-
- Tags
- audace california eldorado
Depending where you are, Todd could be the guy to contact in terms of fabrication.
Another option you could possibly look at is for an upholsterer to add thickness to the seat, possibly raising it an inch or two. Fit a crash bar (engine protection in the event of a spill) which would allow you to install highway pegs.
Welcome to the Forum. You can probably guess that this is a micro brand compared to most all other known manufacturers, so aftermarket parts selection are nearly non-existent. I (unexpectedly) built a small business around offering custom products. That said, I still struggle with my offerings, as people tend to buy other inferior Italian products... So I collect ideas here and offer products in small batch runs. Much like the Eldo backrest project; https://www.guzzitech.com/forums/threads/eldorado-passenger-back-rest-info-read-if-interested.16679/ - https://gtmotocycles.com/products/gtm-california-eldo-1400-backrest -- which promptly/mostly fell flat on it's face once I said time to step up and buy... ghost town. Likely because the costs involved to build them in very limited production.
My Fab shop is in SoCal, and we can do custom work, it’s just not as cheap as people want or hope, as we (my team and I) only do things professionally. That said, as Robert states above, it might be easier to go the custom seat route.
If you can get the bike to fit you, Guzzis are generally very addictive. Just read up here on some of the shortcomings. You have to be a bit of a tinkerer to own them, or be lucky enough to be around a knowledgable and kind dealer.
https://www.guzzitech.com/forums/threads/highway-pegs-on-floorboards.15246/#post-155550
The link I attached above will take you to a thread with some suggestions that I think might be helpful to make the bike more comfortable.