Purchase here; https://gtmotocycles.com/products/gt-cnc-givi-tanklock-adapter-ring
Directions below on how to install our GTM® CNC TankLock Rings on your Breva 11, Griso 11/12, Norge/Sport (2/4V) or Stelvio.
1. Open cap, block tank opening (rag or otherwise) and remove the four (4) allen head bolts:
2. Flip cap assembly over and remove the five (5) phillips head screws holding the inner assembly to the top aluminum cap/ring.
3. Separate the two and remove the rubber o-ring (not used), and fit the GT TLR to the upper aluminum cap, and reinstall in reverse order above. Be sure to align the opening of the TLR towards the rider as shown below in step 4 below.
4. Finished TLR install showing the opening towards the rider. Enjoy.
Pics below on a Griso:
Directions below on how to install our GTM® CNC TankLock Rings on your Breva 11, Griso 11/12, Norge/Sport (2/4V) or Stelvio.
1. Open cap, block tank opening (rag or otherwise) and remove the four (4) allen head bolts:
2. Flip cap assembly over and remove the five (5) phillips head screws holding the inner assembly to the top aluminum cap/ring.
3. Separate the two and remove the rubber o-ring (not used), and fit the GT TLR to the upper aluminum cap, and reinstall in reverse order above. Be sure to align the opening of the TLR towards the rider as shown below in step 4 below.
4. Finished TLR install showing the opening towards the rider. Enjoy.
Pics below on a Griso:
Last edited: