• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Just got a new exhaust, flashed thanks to Todd..questions about evap removal...

Kent

Kent

Just got it firing!
Joined
Mar 5, 2018
Messages
16
Location
Greensboro, NC
Folks...

Hello. Just finished my V7 iii just the way I want it.

I got a new exhaust, mistral shortys. I really wanted Todd’s exhaust but I wanted all black and a more traditional look with dB killers I could change up myself to get the volume how I like.

Todd has sent me 2 maps thus far. The first popped a lot and almost would stall at startup and idle.

2nd map is a lot smoother... barely pops and takes a bit to start more than stock but idles fine... thanks Todd...and he recommended that I remove the evap system.

I have seen some info from a few people and some pics from a racer. Is the v7iii instructions the same? Does anyone have a complete guide with pics for the V7 iiii as well as links to any plugs that they used and Todd’s filter or one from someplace else if Todd has not finished it.

One thing i’d Like to ask. Is it safe (any fumes) with a hot water tank in your garage?
 
I have a gas water heater in my garage 10 feet from my bikes, no problems, yet. Yes, removal of the evap system is on here somewhere, it takes a while to find.
 
Far as I'm aware, all the US issue V7III bikes have the same evaporative emissions system. Doesn't matter which model with respect to the pieces and their locations.
 
You must log in or register to reply here.
Back
Top