Mike Peavey writes:
If you happen to loose the nut that holds the fork leg to the front hub, don't ask how and don't bother looking for another, so far as I can tell it doesn't exist. 14mm x 1.25 pitch that uses a 19mm wrench. So I bought a 14 x 1.25 tap, drilled out a 12mm nut (19mm hex) and viola, Bob's your uncle. Hard to believe anyone else in the world will loose one, but if you do, let me know, I'll make you one. I need to find another use for a $30 tap anyway. By the way, 14x1.25 is the same as a spark plug.
Email: mpeavey at comcast.net