• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

MGCT ABS Calibration

Fast1400

Fast1400

Tuned and Synch'ed
Joined
Jul 19, 2014
Messages
71
Location
Maine
2013 Custom. Removed the battery to replace the air filter and when all back together found my MGCT setting cleared, yellow ABS on dash but no other warnings or service codes.
Went into the calibration screen, 2nd gear @ 18mph for at least 30 seconds, still 'CALIBRATING' flashing on the dash, never accepts and saves.
Tried calibrating when MGCT is set off to 0 and when MGCT is set to 1 with the same results, 'CALIBRATING' won't save.
I've calibrated it at least twice in the past when fitting new tires without issue but this time it's not wanting to calibrate.
Should I disconnect the battery and start over ? Maybe remove the sensors and clean? IIRC they're magnetic and could attract shavings.
Any ideas ? I like to use the cruise control when slabbing it.
 
Update - took Moto-Uno's advice and removed both sensors and cleaned, they both had numerous little metal bits attached, as well as cleaned both wheels and ABS rotors with standard degreaser and dried. Back together, set MGCT to 1 and took off wanting to calibrate but ABS light went out before I could begin calibration. My guess is it used the old MGCT 1 calibration and couldn't set ABS or calibrate before because of the bits.
 
You must log in or register to reply here.
Back
Top