Ken Miller
Just got it firing!
Need to adjust the play in my clutch lever (was getting hard to shift into neutral) and can't believe the owners manual does not give specifications. How much movement, measured where?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
2mm play - gap in the lever to where perch meets. You should be able to slip a nickel in there.
Sounds a little tight. I've always gone with 3-4mm. Also to the original poster, check the angle of the arm at the back of the gearbox. Lever should be close to 90 degrees with the clutch disengaged (clutch lever pulled in).