ChuckH
Tuned and Synch'ed
I have a set of aluminum rear cases (Moto-Sport Panniers) that were on a KLR that I owned and are now mounted on my Wee-Strom. I will want to use them on a Stelvio, when I get one.
The original mounting bracket, where the cases attached, was in the shape of a rectangle (with a radius at the corners) and was made from 16mm (5/8") diameter steel tubing. The outside dimensions for the rectangle were 35cm (13 5/8") horizontally and 22.7cm (8 7/8") vertically.
I have seen postings about Stelvios where either Trax (Guzzi) or Hepco-Becker Case Mounting Brackets were being used. Are either the Trax or H-B brackets similar in shape and size to what I have described above?
Thank you.
The original mounting bracket, where the cases attached, was in the shape of a rectangle (with a radius at the corners) and was made from 16mm (5/8") diameter steel tubing. The outside dimensions for the rectangle were 35cm (13 5/8") horizontally and 22.7cm (8 7/8") vertically.
I have seen postings about Stelvios where either Trax (Guzzi) or Hepco-Becker Case Mounting Brackets were being used. Are either the Trax or H-B brackets similar in shape and size to what I have described above?
Thank you.