• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

stelvio will not start

woody

Just got it firing!
Joined
Apr 3, 2016
Messages
6
Location
UK
Hi all ,i have a 2011 stelvio which will not start, it all started a month back it stopped charging the battery,so i put a new alternator on it,it started up ok then but the volts on the dash said it was only putting 12 volts out when it was revved up to 5000, so asked on the stelvio facebook site if any one had any ideas a few said clean your earth lead ends which i did, and that's what started this none starting problem, so ive up to now replaced 4 of the relay's and checked every fuse and doubled check them all oms tested the leads to the starter which is ok had the starter off and tested it@s ok,ive checked the ECU to see if there is any bent pins in there its ok all Connections are fine. when i switch the key on the 12v relays which are on the left of the bike, one clicks but the one with the same wire's that go to starter does not click, which before this all started did,, and when you turned the ignition on you could here a click from the switch on the handle bars at the start switch which now does not have, but i tested the start switch and it was getting power to it when ignition was turned on, all so now i have the plug sign on the dash but no bad codes on the diagnostics page in the dash board set up, ive got the cable to connect my lapto to the bike and the software from guzziaidg ,which when i set it away to start connecting with bike just return's with no connections found ,so its not reading the ecu as well as everything else, ive had my multi miter ends into every lead i can find to test for power or ows it and up to now ive got good Reading for all power connections. So has any one any ideas please
 
When mine wouldn't start not long after having the starter motor replaced, there were a couple of faulty relays, which are situated to the right hand side of the dash, under the 'fairing'. Might help.
 
Back
Top