• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

We're hiring, any of you folks looking for work

G

guzzi jon

High Miler
GT Contributor
Joined
Oct 28, 2008
Messages
707
Location
Anaheim Hills, CA
My company, Ontic Engineering (www.ontic.com) is experiencing a 40% growth in 09, so we are hiring a variety of folks, including Manufacturing and Mechanical Engineers, a Director of Technical Engineering (Kev S, call us, Jan is retiring) Technicians, Document Control Coordinator, 2 Senior Buyers, Pricing Analyst, Customer Service folks, Training Coordinator/Manager, Warehouse folks. I personally am hiring a Supplier Quality Engineer, a Process Quality Engineer, 2 A Inspectors (with CMM experience - Open DMIS) a process/product Inspector and a Quality Analyst. Kevin Seiler was recruited to our company through the guzzi community (Thanks Ed M) so I thought I would post here, he bailed on us, but he'll be back. We're growing, we pay decent, have decent benefits, every other friday off, so PM me if you want any info. Oh yeah, I get between $750 and $1500 for anyone getting hired :) Our website is not current with the openings, so PM me or call during biz hours at 818.725.2305 you can see some of the jobs here, on the right side under jobs http://www.ontic.com/#/manufacturing/
Cheers,
 
I already asked months ago about Greeters or Cart Collectors and you never got back to me Jon:angry:
 
220 wrote:
sign me up 4 your uk branch
Click to expand...

James, we've got a new facility in Slough, decided basingstoke was not for us. we're hiring engineers, customer service folks, assembly / MRO techs to EASA 145 as well as EASA Part 21 new production. Will need buyer/planner, Contracts, Supply Chain/Procurment group. I'm Hiring a Quality Manager, A Senior Quality Engineer, a Quality Anaylist and a class A Inspector with both new production (part 21) as well as maintenance (part 145 expertise. We've got the job descriptions sent over and have folks setting up the interviews and talent searches... We need to bring on ~15 folks in January.... If you know any Aerospace talent near Slough or even Heathrow, send em my way.

Thanks,
 
my nice danyelli has a degree ibz and legal she worked as a purchaser for amgen ,,and stop to get her hr in as she whats to be a fly gril she has just started for the company here in town that builds the usa droumps you should talk to her and see if you could get your 1500 and her a sweet job any opening 4 a person that does speiling checks:laugh:
 
Same here.....somehow the supply of idiots and a$$holes doesn't seem to be affected by the economy......
 
Just for kicks, I followed that link of yours and it doesn't seem to work in Firefox. So I opened Safari which I rarely use, and at least then the fancy little scrolling job on the right worked, but when you click on the link to look at jobs, nothing happened. I don't have IE (I mean seriously, who would???). :)

-Tim.

Oh, now I got it to work in Firefox...
 
this guys my buddy Philip Alan Lyons

2800 Plaza Del Amo #437 Torrance, California 90503-8906
“E” Mail: palyons@socal.rr.com
(310) 328-6762 (Home) (310) 292-0288 (Cell)

Summary of Qualifications: A Program Manager with an extensive background in Guidance & Navigation, GPS, Avionics and Systems Engineering. I have held a series of increasingly responsible positions: Senior Technical Specialist, Lead Engineer, Deputy Program Manager, Integrated Product Team Lead and Program Manager.

Experience:

Raytheon Systems Company 2101 E. El Segundo Blvd., El Segundo, CA 90245 4-01 to Present

Program Manager III – Weapons Systems and Avionics – Precision Guidance Systems (PGS), responsible for cost, schedule and system performance on assigned programs. Planed and scheduled the work, assigned personnel to the tasks, interfaced with the customer, management, and internal organizations. Managed the effort, reported the status, and chaired program reviews. Projects included Geo Location/ Precision Ground Targeting; Affordable, Adaptive Conformal ESA Radar (AACER); Miniature Air Launched Decoy (MALD); Advanced Cruise Missile (ACM), Joint Precision Approach and Landing System (JPALS) program, and Supersonic Sea Skimming Target (SSST).

Primex Technologies 9236 East Hall Road, Downey, CA 90241 6-99 to 4-01

Systems Engineer/Acting Deputy Program Manager on the Objective Crew Served Weapon (OCSW) program, responsible for cost, schedule and overall performance of the weapon system, including system interfaces and system integration. Developed and maintained the master program plan and master program schedule. Developed and assigned Work Breakdown Structure (WBS) elements for program. Tracked program metrics, co-chaired program reviews, calculated and reported earned value, and prepared the Cost/Schedule Status Report (C/SSR). Cost Account Manager (CAM) for System Engineering.

Northrop Grumman Corporation One Hornet Way, El Segundo, CA 90245 6/85 to 6-99

Avionics - Senior Technical Specialist: Kistler K-1 launch vehicle, F/A 18 Fighter/Bomber, and B2 “Stealth” Bomber programs. Held a series of progressively responsible engineering positions; Responsible Engineer (RE) for B2 flight avionics systems, avionics IPT team member, “Tiger Team” member engineer. Recognized for achievement and cost savings to program. Lead engineer on the electrical design group on the Kistler K-1 rocket program, which defined the complete 2nd stage electrical system with interface to 1st stage and payload, and was the electrical systems representative to the K1 IPT along with the mechanical and structure group leads.

Rockwell International 100 North Sepulveda Blvd., El Segundo, CA 90245 12/80 to 6/85

MANTECH Project Manager: Responsible for a multi-million dollar modernization program of manufacturing processes and equipment used on the B1 Bomber program. Lead a team of engineers and technicians involved with “Factory-of-the-Future”, a fully integrated manufacturing facility using the “Factory/Center/Cell” hierarchical environment, linked via IEEE 802.3 standard Ethernet. Rebuilt and retrofit manufacturing systems such as large CNC machines tools, autoclaves, curing ovens, chemical processing lines, and radiographic (x-ray) inspection equipment. Implemented fully automated robotic manufacturing cells, automatic storage and retrieval systems, optical recognition systems, DNC networks, and unmanned guided vehicle systems.

Education:

Bachelor of Science, Mechanical Engineering, Minor in Electrical Engineering
Purdue University, West Lafayette, Indiana 47906

Security:

Active Secret Clearance with Special Background Investigation (SSBI). Previously cleared to Top Secret with special compartmentalized access and special access for cryptographic equipment and materials.
 
James,
Have your bud call me, we're looking for PM's.... As for not IE user's, we're a biz, most businesses inked the deal with microsoft in babies blood....
 
cool his email and phone on his page zap him a email you guy can go teck on each other pms its that wifes have:)
 
Hey Mr. Guzzi Jon,

I sent in my rez but no acknowledgement.

I have quite a bit of warehouse experience.
 
You must log in or register to reply here.
Back
Top