Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have the bar risers in stock now on the online Store HERE. Will fit all Guzzis with 1-1/8" bars (Cal 1400, Griso & Stelvio). 1"/25.4mm risers. Limited production, so grab them quick if you want a set as I'm not sure when I'll do another run. Thanks for the continued input and support.
Yes and I love them. Lets me stay back on the backrest of the Corbin seat. I am 5'10" with a 34 sleeve length fits perfectly and my arms are not above (sport bike) or below (ape hangars) the grips. Highly recommended.!Anyone try the bar risers with a Touring?
roadventure and buzglyd, I just ordered a pair and wondered whether your cables had to be replaced and re-routed. Thanks.
I have the bar risers in stock now on the online Store HERE. Will fit all Guzzis with 1-1/8" bars (Cal 1400, Griso & Stelvio). 1"/25.4mm risers. Limited production, so grab them quick if you want a set as I'm not sure when I'll do another run. Thanks for the continued input and support.
As long as they are the stock bars or have retained the larger 1.125" bars at the clamps, yes they sure will.Hi Todd. Would these work on my 2008 1200 sport?
yes stock bars....my theory is that the risers will allow me to rotate the bars towards the rider....without hitting the tank at full left and right lock....thus doing almost exactly what the aprilia mana bars would do.....other than the dealing with the width....would you agree?As long as they are the stock bars or have retained the larger 1.125" bars at the clamps, yes they sure will.
Can't say rotate, more like move them closer.my theory is that the risers will allow me to rotate the bars towards the rider....without hitting the tank at full left and right lock....thus doing almost exactly what the aprilia mana bars would do.....other than the dealing with the width....would you agree?
Very welcome, and thanks back to you for the purchase. I have just a few left until the next batch come in.Can't tell you how happy i am with these! The bike is so much more comfortable now, and they look great. Install was a breeze and they look OEM, thank you for a great product and the support!
~19-21 ft.lbs.Hi, quick question: What is the correct torque setting for the bolts securing the handlebars?
Ok. Back from the shakedown run. MUCH better for me. Just for reference, I'm 5-10 1/2. It's a more relaxing position and i feel as if I have much better control of the bike. I played with the rotation of the bars a bit and found a perfect fit.
Now I'll have to put on a few hundred miles and see if it needs any fine tuning.
I am just about to try rotating the bars and anticipate having to adjust the levers, etc. When rotating the bars, did you move the controls?