Jeffrey Dodd
Just got it firing!
I am having an issue with my 2019 Moto Guzzi V7 III and I am hoping someone has a good idea.
When I power on the bike the rear brake flashes, then stays on as if a break lever has been activated.
Has anyone diagnosed this before? Do I need to replace the front and/or rear brake switch?
Situation:
V7 III Rough
Bake has been running for over year with no issues.
No changes have been made in over a year.
Brake light stays on.
Fuses are all unbroken.
Wheeles freely spin; the bike stops when applying either the front or rear brake.
May of 2022 SATO rear sets were put on, this includes a new brake switch.
December 2021 LED taillight put in.
What I have done:
Replaced the rear bulb with a stock incandescent and spare LED - no change Brake Light stays on at full power.
I have removed the front and rear switch from the electrical:
-I cut both electrical wires to the rear brake - brake light goes out
-Unplugged the electrical leads to the front brake switch - brake light goes out
Verified the fluid level in the brake system and did a fluid change (SATO suggestion) - no change Brake Light stays on at full power.
Thank you for taking the time to review this.
When I power on the bike the rear brake flashes, then stays on as if a break lever has been activated.
Has anyone diagnosed this before? Do I need to replace the front and/or rear brake switch?
Situation:
V7 III Rough
Bake has been running for over year with no issues.
No changes have been made in over a year.
Brake light stays on.
Fuses are all unbroken.
Wheeles freely spin; the bike stops when applying either the front or rear brake.
May of 2022 SATO rear sets were put on, this includes a new brake switch.
December 2021 LED taillight put in.
What I have done:
Replaced the rear bulb with a stock incandescent and spare LED - no change Brake Light stays on at full power.
I have removed the front and rear switch from the electrical:
-I cut both electrical wires to the rear brake - brake light goes out
-Unplugged the electrical leads to the front brake switch - brake light goes out
Verified the fluid level in the brake system and did a fluid change (SATO suggestion) - no change Brake Light stays on at full power.
Thank you for taking the time to review this.