Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
No need to be sorry. Just be sure to post in the thread that talks about it. I’ve now combined them.Hi i am sorry for sorry for writing this the question I will try not ask anymore.
Thank You very much Todd for this article I think the MotoGuzzi motor is fantastic.Sorry you had to write such a long article but I very much appreciate this and Thank You Again Todd .And also thank you for all the great work you do making all the fine products for the MotoGuzzi.Scott Williams.Found it. Link below. A big part of the power increase is the massively larger throttle body, and no it does not fit on the V9 line.
V85 TT Info
2. two new versions for the V7 during this year, Looks like the Carbon Shine might be one of them. I like! Much better than the Carbon imho. From the handbuilt show in Austin last week. Nice black leather seat! Very cool.www.guzzitech.com
Also from that thread...
A New Engine, a Future Classic
The V85 TT introduces a new Moto Guzzi engine. Its configuration mirrors that of all Moto Guzzi bikes in production today: an air-cooled transverse 90° V twin with OHV distribution and two valves per cylinder, the pride and tradition of the Mandello Eagle. Engine capacity is 853 cc, thanks to a bore to stroke ratio of 84 x 77 mm. The most modern of all engines in the range, it can boast a ratio of almost 100 HP/liter. Thanks to its complete new design and the use of materials generally destined for race bikes, such as titanium, the new “eight and a half” is able to deliver maximum power of 80 HP and boast an impressive maximum torque value of 80 Nm at 5,000 rpm, with 90% of the torque already available at 3,750 rpm, in keeping with the tradition of the Mandello twin, which has always offered excellent drive even at very low revs. This is the first Moto Guzzi small block engine that can easily reach 8000 rpm, an aspect that showcases its modern and exuberant nature.
The crankcase is the fruit of a new design and is stiffer, in order to fulfil its new role as a stress-bearing element in the frame, introducing new frame connections and strengthening elements in the internal stud bolt area. It also features new ports in order to check the oil level in the lower semi-crankcase. Lubrication involves a semi dry sump, with two coaxial pumps tasked with oil delivery and recovery that ensure excellent lubrication and do away with the need for an oil radiator, thus reducing the overall weight. The semi dry sump solution allows for a totally isolated crankcase chamber, preventing any power absorption that would occur with a dry sump system, where the piston also has to overcome the counter-pressure inside the sump. The oil circuit is totally new and features holes of different diameters, with one of the two pumps transferring lubricant from the crankcase chamber to the sump. The latter is reduced in size to increase ground clearance and allow for assembly of the protective aluminum under-sump. The whole crankshaft is new and, together with the piston rods, also new, allows for a reduction in weight of almost 30% with respect to other small block engines, upping throttle response speed while significantly reducing any vibration. The upper section of the twin engine is also totally new: in keeping with Moto Guzzi identity, OHV distribution with two valves per cylinder is retained, though the system and materials used are all new. Cylinders are of reduced height, while new and efficient oil passages and a brand-new fastening system to the crankcase ensure robustness and reliability. The heads have new special-shaped mix entry ducts and links. One of the stand-out aspects of a Moto Guzzi engine is its distribution, complete with aluminum roller cams and rocker arm pushrods. The use of 42.5 mm titanium intake valves, which weigh half of those in steel, has allowed for much more radical opening timing, to the benefit of maximum
Power. Low-profile pistons are used, with 20 mm pins, as well as new head and plug covers that differ in shape, while the flywheel and generator have been boosted. Injection makes use of a single 52 mm throttle body, while electronic management is entrusted to a multimap Ride-by-Wire throttle control, a solution that allows for delicate and scrupulous control of valve opening, not only optimizing overall efficiency for a smooth, rich delivery, but also saving on fuel. The new Moto Guzzi engine is in fact very frugal in terms of consumption: it has few components that absorb power (OHV distribution is one of the most frugal in terms of power absorption) and has no cooling circuit pump or long drive chains or belts.
Significant work has been done on the gearbox to make it smoother and more precise. The gearbox and clutch housing make for increased ground clearance; the dry clutch exploits a reinforcement disc under the clutch plate as well as a new clutch disc; a triple ring system is also introduced for the first time: a synchronizer that reduces gear noise to a minimum, particularly that of first gear. The ratios are new. In addition, the gears gain flexible coupling, for even smoother final transmission at the PTO shaft, this too new. Lastly, the swingarm housing zone is sized accordingly and features large diameter bearings.