Diag Tool - V7-9 - V85TT - V100
Diag Tool - V7/V9 E3-5, V85TT E4-5 & V100 E5 NOT STOCKED - BROUGHT IN ON PAID ORDER ONLY. E5 models use the red 6-pin Diag plug as shown. The older E3/4 models use the 3-pin connector. Select the option best suited for your bike. The E3-E5 option ADDS both Diag connection cables AND required...
gtmotocycles.com
Diagnostics and service wrench resets (and possibly other items listed below) on the V7/V85TT/9 E4/5 models. This does NOT handle ECU mapping.
Possible Diagnostic Functions/Options:
Service ResetError memory Read and Delete
Key programming Assist
Injection system Unlock
Throttle valve Adjust / Adapt
Date and time setting, e.g. after battery replacement
Reset of the adaptation values
Specific actual / target values / live data
Read the current mileage
Chassis number Read
ABS pressure modulator / bleeding test from the ABS hydraulic system
Stepper adjustment
For E3/4 bikes with the 3-pin Diag connector, you cannot reset the Service icon via this plug. You must use the secondary cable provided and connect to the plug below under the right side battery side cover. I confirmed that it does work as of today, 4.5.24 as shown in the bottom photo.
Last edited: