Britcheflee
Just got it firing!
So, as suggested I got my meter out, fully charged battery and reconnected - turned on ignition switch and lights came on - then as per usual as soon as I touched any button/switch they went out. Connected negative side of meter to negative battery side and although lights out there is power to lets say the turn signal relay, the relay down by the starter and on all fuse box fuses (apart from the two which I think are lights? - to the left of the box when looking to rear of bike.
However, when I touched the positive lead of the meter to any ground on the bike - even the cylinder heads it shows 12 volts with the ignition switch on, nothing when its off. To me, that indicates I have a short somewhere? Wondering if a wire up in the push button starter on the handlebar is grounding out there?
However, when I touched the positive lead of the meter to any ground on the bike - even the cylinder heads it shows 12 volts with the ignition switch on, nothing when its off. To me, that indicates I have a short somewhere? Wondering if a wire up in the push button starter on the handlebar is grounding out there?