hi
on my 1200 sport i have an 08 code, oil can and red triangle warning. The bike runs fine.
i have checked the oil pressure with a gauge and it is fine, i have changed the switch, but the code and warning still comes on as soon as i start the engine.
i have checked the oil pressure switch voltage out of the block with the engine ticking over and it is 7.2v. is this too low?
Also on my dash the battery voltage reading is 12.1v when the battery is actually 12.8v, could the dash falsely reading a low voltage be causing the alarm?
i have cleaned and refitted all of the connectors but still no change
any advice would be gratefully received
thanks
Steve
on my 1200 sport i have an 08 code, oil can and red triangle warning. The bike runs fine.
i have checked the oil pressure with a gauge and it is fine, i have changed the switch, but the code and warning still comes on as soon as i start the engine.
i have checked the oil pressure switch voltage out of the block with the engine ticking over and it is 7.2v. is this too low?
Also on my dash the battery voltage reading is 12.1v when the battery is actually 12.8v, could the dash falsely reading a low voltage be causing the alarm?
i have cleaned and refitted all of the connectors but still no change
any advice would be gratefully received
thanks
Steve