Penis Rotor
GT Godfather!
Just to let people know that if they have to swap a head on an 8V the casting has changed slightly and the breather plate on the end of the cam from the 'Old' casting won't fit in the new one. No big deal if you have access to a lathe and can use one, just turn off the stepped flange on the cover. It's just that the 'New' casting doesn't have the relief for the step. :roll: five minutes in a three jaw simply using the inner face as a register with the tool then turn off the step. Job done but its not like you'll get paid for that if its a warranty job.
Pete
Pete