roadventure
GT Reference
No, I'm building what Guzzi_Lou posted above, just a bar spacer. You'll have to look at the parts PDF to see if the clamp tops are available separately.
Hi Todd,
Any further information on your bar spacer yet?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
No, I'm building what Guzzi_Lou posted above, just a bar spacer. You'll have to look at the parts PDF to see if the clamp tops are available separately.
Hi Todd,
Any further information on your bar spacer yet?
Hi Todd,
Any further information on your bar spacer yet?
If they offer them for that, buy them. I likely won't do them as that might be about my cost.They are available for around $30 apiece from MG.
I meant the clamp tops, or as MG calls them, U clamps lol.
If they offer them for that, buy them. I likely won't do them as that might be about my cost.
Okay, I looked at the accessory offerings and MG DOES NOT offer bar spacers as Guzzi_Lou had shown in his post.
http://www.motoguzzi-us.com/public/upload/pdf/mg-accessories-catalog-2015.pdf
OK, so this is back on now then?
View attachment 8736
Yes, I did it myself and it was fairly easy. Actually, I did it twice because I decided I preferred the Custom bars and reinstalled them. Sold the Touring bars on eBay.
Take a look at your Custom. You will see the throttle cables curving up to the handgrip from under the top triple clamp. The attached photo shows those same cables rerouted above the triple clamp.
You have to detach the cables from the throttle tube to do this. I don't have any pictures of that, but it will be obvious after you remove the plastic part (with the starter button and light switch).
View attachment 8737
OK, I am having some machined this week, target will be $99. Takers?Was never off........ I am waiting.
OK, I am having some machined this week, target will be $99. Takers?
Okay, I looked at the accessory offerings and MG DOES NOT offer bar spacers as Guzzi_Lou had shown in his post.
http://www.motoguzzi-us.com/public/upload/pdf/mg-accessories-catalog-2015.pdf
Machinist is working on them as I write. Will post info on the soon.
Sounds like most are looking for 1"/25mm. Correct?I'm in for a set. How tall are the spacers btw?
Sounds like most are looking for 1"/25mm. Correct?
Production wise, one dimension is needed, but *IF* I were to do any varying sizes, I would need those paid orders ASAP. Post below if you want anything over 1.0", and use the donation link above to order at $109.95 shipped with bolts.I was assuming a more reasonably priced version of the offering from FAST BY FERACCI. They are producing a 1" rise. That said, it would be a simple thing to cut different sizes (1.00", 1.25, 1.50", etc...) if you wanted to offer a variety. The cost to you should be the same as the major part of the production cost is in machine time.