iainw
Cruisin' Guzzisti
In the last 5k miles I’ve replaced the front wheel bearings, swing arm bearings, large carc bearing and I’m now onto the steering bearings. Luckily, I’ve stayed on top of the suspension linkage rollers and they’re OK. At the MOT a couple of months ago they go picked up the steering as ‘slightly notchy’ and noted as an advisory. I’ve got my nice new shiny taper rollers ready to go in and this is what came out.
I’ve knocked the outer races out from the frame, nice and easy, no fuss with that job, and I’ll take the stem to the local garage on Saturday to have the bottom race pressed off and the new one pushed on.
I’ve put a nice little grease nipple in so that the next set doesn’t go the same way.
I’ve knocked the outer races out from the frame, nice and easy, no fuss with that job, and I’ll take the stem to the local garage on Saturday to have the bottom race pressed off and the new one pushed on.
I’ve put a nice little grease nipple in so that the next set doesn’t go the same way.